The industrial piercing is really two piercings in one: an outer helix piercing connected to a forward helix piercing by a straight barbell. … While popular, this piercing doesn’t work for all ears, as you need to have a defined helix, or ear “ridge,” and enough space for the barbell to sit unobstructed.
Considering this, can small ears get industrial piercing?
The look of an industrial piercing greatly depends on the anatomy of your ear. If you have a smaller ear, you might not be able to accommodate the industrial piercing. … Additionally, it might not make a great first piercing. Healing cartilage is more susceptible to issues like cartilage bumps or hypertrophic scarring.
Then, can I pierce my own industrial?
Industrial piercings A.K.A scaffold consists of two piercings connected with a single bar. Self-piercing is not advisable but if you are confident of pulling it off then here’s how.
What ears can’t get industrial piercing?
If your ear has a prominent ridge that runs from the upper part of the ear to about midway then you should be able to get an industrial no problem. However if you have an ear type where the upper part of the ear is mostly or entirely flat then an industrial will probably not work out for you.
Can you numb your ear before getting an industrial piercing?
Numb® for Industrial Piercing. Since industrial piercing is one painful practice, you just can‘t rely on any anesthetic cream; you need the best and that’s what Dr. Numb® is all about. … Numb® cream seeps into the hard ear cartilage and temporarily numbs the target position for a painless piercing.
Are industrial piercings worth it?
It may seem like a lot, but I can promise that all of the work is absolutely worth it. I am in love with my industrial, so much so that even a year later I find myself admiring it. If you’re thinking about doing it, go for it!
What size do they pierce your industrial with?
Standard piercing sizes
| Piercing | Standard Gauge | Standard Length |
|---|---|---|
| Tongue Piercing | 14G | 5/8″ |
| Cartilage Piercing | 16G , 18G | 3/16″ , 1/4″ and 5/16″ |
| Eyebrow Piercing | 16G (14G is also commonly used) | 1/4″ , 5/16″ and 3/8″ |
| Industrial Barbell | 14G (16G is also commonly used) | 1 1/2″ (varies) |
What piercings look good with industrial?
15 Industrial Piercing Ideas That Rock
- a beautifully accessorized ear with three lobe piercings, a tragus and an industrial one all done with similar studs and a bar.
- a bold ear with four lobe piercings, a daith piercing and an industrial one with shiny earrings and a bar.
How painful is industrial piercing?
Industrial piercings are moderately painful. While they tend to hurt more than standard lobe piercings, they’re still much less painful than piercings on more sensitive areas. … The initial piercing pain is a sharp pain, like a hard pinch, and you may also experience some pain as the jewelry is pushed in place.
What does an industrial piercing say about you?
Industrial Piercing
You tend to draw people in with your charming personality, but you only have a few very close friends. You‘re less likely to get hurt that way, because you may look all rough and tumble, but you‘re a big softy on the inside.
Can you wear headphones with industrial piercing?
Although many headphones have a fairly light touch on your ears, over time that pressure can affect your piercing. At least for the first 2 to 3 months, you‘re better off wearing earbuds.
Can you sleep on an industrial piercing?
Can I sleep on my industrial piercing? You want to avoid sleeping on an industrial piercing because it adds additional pressure on the jewelry. It will be more likely to have scarring if you sleep on it.
Do industrial piercings get infected easily?
Industrial piercings are more prone to infection because there are 2 wounds, and the tension placed on the skin from the jewelry also increases inflammation and vulnerability to the skin. An infection occurs when harmful bacteria build up in one or both of the holes where your ear is pierced.
What to know before getting an industrial piercing?
Don’t worry we got you, here are 5 things you need to know before getting an industrial piercing.
- Anatomy. Before going in to get an industrial piercing you want to go to your local piercing studio and get your ear checked by a professional piercer. …
- If You’re Sick Don’t Get It. …
- Clean Your Ears. …
- Reputable Studio. …
- Be Prepared.
