To measure a labret you simply have to measure the barbell length excluding the platform base and screw head if there is one. For labret piercing, ring size vary between 8mm(0,31in) and 11mm(0,43in). 8mm(0,31in) and 9mm (0,35in) tend to be the most common sizes for this piercing.
Accordingly, what is the most common size for a labret piercing?
The most common gauges for a labret piercing are 16ga or 14ga. The thickness of your lips should determine the length of your labret. The most common length is 3/8 inch but 5/16 inch and 7/16 inch are common as well. Labret and Monroe can also be used for Cartilage rings.
In this way, what size is a vertical labret?
This thick rod-shaped type of jewelry usually measures 14- to 16-gauge and bends around the lips with beads on each end facing forward. Vertical labret bars. These go through the piercing vertically and have a bead on each end. You can even put these side by side if you get double vertical labret piercings.
How snug should a labret stud be?
Labret– Labret piercings should be fitted by a piercer, and should be a fairly snug fit. With studs, they back disc may sink slightly into the lip tissue, commonly called nesting. This is normal, and as long as its easy and comfortable to pop the disc out, totally safe.
There are a few different lengths that the labret can be pierced at; 7/16″ or 3/8″. It is not uncommon for women to be pierced with a 3/8″ and men to be pierced with a 7/16″. This is dependent on your anatomy and that is something that your piercer will determine before the piercing.
Tongue or lip piercings that come into constant contact with your gums can cause gum recession. When your gum recedes, you are exposing more of your tooth’s root, which can make it easier for bacteria to build up and severely damage your tooth. Without the proper care, this can result in tooth loss!
Can I put a 14g belly ring into a 16g hole? Potentially yes if your piercing is fully healed. But it’s going to be a tight fit. If you want to experiment then it usually works better if you try after you’ve had a bath and dried off, as its usually easier to put piercings in at this time.
It’s best to wait until your piercing is completely healed before switching to a ring. They’re not suitable for healing piercings. Next week is way too early to be changing jewelry.
Get the Look
Dahlia piercings will emphasize the corners of your mouth, and has the effect of making full lips look fuller, but thin lips look particularly long and thin.
Hold the flat disc on the back of the labret stud with one hand or use your teeth to keep it steady. Grip the outside part of the stud with your other hand and unscrew it counterclockwise until the ball comes off. Remove the piercing by gently pulling the disc up and out of your mouth.
If your piercing jewelry is starting to sink into your skin/tissue, see your piercer right away for a longer bar. Some piercing do embed slightly, we refer to this as ‘nesting’. Lip and tongue piercings tend to do this as our oral tissue is very soft. … Oral tissue regenerates much quicker than other body tissue.
Ideally, you should wait until you are healed to do anything involving fluids, even with a monogamous partner. … Any oral sex during healing should be fluid-safe, and if you decide to kiss your partner anyway, at least have him or her rinse their mouth before and clean your mouth and piercing after.
As one of the few true lip piercings, the Ashley piercing consists of a single puncture through the center of the lower lip, exiting through the back of the lip into the mouth. … The Ashley piercing typically uses a labret stud with a dainty charm, ball, or gemstone sitting on the lower lip.
No kissing or oral play during healing.
Although this is a common tip for all oral piercings, it’s especially important for the vertical labret since it’s located directly on the lip.