The measurement that you need is the distance from the piercing hole to the edge of your ear. Take this measurement in a straight line, because if you measure at a diagonal angle you will end up with a hoop that fits larger than you anticipated.
Additionally, is 14G bigger than 16G?
Jewelry is measured through a gauge system (see chart below). The higher the gauge number the smaller the wire is. A standard “earring” is usually 20 gauge. Jewelry gauges/sizes can vary between manufacturers.
| Gauge | Millimeter | Inch |
|---|---|---|
| 16g | 1.2mm | 3/64″ |
| 14g | 1.6mm | 1/16″ |
| 12g | 2mm | 5/64″ |
| 10g | 2.4mm | 3/32″ |
Thereof, how do I know what size my lip piercing is?
When getting your lip pierced your piercer will pick the correct size based on your anatomy and the overall size of your lip. A captive bead ring will usually come in three sizes, 18 gauge, 16 gauge and 14 gauge. The gauge refers to the overall thickness of the ring and a 16 gauge is smaller than a 14 gauge.
Can I put a 14G in a 16g piercing?
14g jewelry is larger than 16g jewelry, but you might be able to fit it. … The size difference between the two is small, but if you go back and forth it would obviously be a stretch every time you wanted to wear the 14’s, since your ear would shrink back to a 16g while you had that jewelry in.
How big is a 14 gauge piercing?
1.6 millimeters
Can I put a 20g in a 16g piercing?
yes you can. When learning about piercings sizes you will know that the bigger the number the smaller the gauge of the piercing so yes you may use an 18g. the 18g is smaller than the 16g. Just be aware though that sometimes user smaller jewelry could cause your jewelry to get accustomed to that size.
What is the smallest gauge size?
The sizes range from millimeter measurements to inch measurements. The smallest gauge, 20, measures 0.88 millimeters or 1/32 inch. The bigger the gauge, the smaller the numbers get.
What is the standard size of a Monroe piercing?
The standard gauge for a Monroe piercing is 16-gauge, and the typical lengths are 1/4”, 5/16”, and 3/8”. After the piercing area has healed, you will generally move on to piercing jewelry with a smaller post.
Is 18G smaller than 16G?
Though it seemingly goes against logic, earrings and other jewelry gauge sizes actually get bigger the lower the number of the gauge. An 18 gauge, one of the smallest gauges, is actually smaller than a 16 gauge earring, with the largest gauges being 0, 00, and 000 gauge jewelry.
Can I put a 16G in an 18G piercing?
If I pierce with a 16g needle, can I use 18g jewelry? Yes you can, in fact that’s typically what a piercer will do, especially with cartilage piercings. They pierce with a gauge size bigger than the actual jewelry. It allows room for swelling and placing the jewelry.
