The 14g is a larger barbell than the 16g by a fraction of an inch (0.013). Most piercers will have a preference between 14 and 16g for industrial piercings and while having a 14g means you can swap out for 16g jewelry you cannot do it the other way around without pain.
Simply so, what is the normal size for an industrial piercing?
Standard piercing sizes
| Piercing | Standard Gauge | Standard Length |
|---|---|---|
| Industrial Barbell | 14G (16G is also commonly used) | 1 1/2″ (varies) |
| Labret Lip Rings | 14G or 16G | 1/4″ , 5/16″, and 3/8″ |
| Monroe Piercing | 16G | 1/4″ , 5/16″ and 3/8″ |
| Nipple Piercing | 14G | 3/8″ , 1/2″, 9/16″ |
| Inches | Millimeters |
|---|---|
| 9/16” | 14mm |
| 5/8” | 16mm |
| 11/16” | 18mm |
| 3/4″ | 19mm |
In respect to this, how do I know what size my barbell is?
The barbell length is measured in a straight line across the center, between the end balls. The post length is measured in a straight line, between the top ball and the base. The inner diameter is measured in a straight line across the center, inside the ring.
Can you put a 14g in a 16g?
14g jewelry is larger than 16g jewelry, but you might be able to fit it. Yes, you can stretch you piercing to a 14g just make sure that the jewelry that you‘re buying is suitable for a freshly stretching piercing.
Can you put a 14g in a 16g septum?
Yes you can. The jewellery won’t be very snug, though, and might move around a lot. Having said that, the whole will probably close up a bit around the smaller gauge jewellery so you might not be able to wear 14g there any more. … So I used this 2mm diameter needle for a piercing with a 16g jewellery.
Is a 14g or 16G bigger?
14g is bigger. The lower the number, the bigger the needle or jewelry. … So buy 16g jewelry and a 14g needle, or 14g jewelry and a 12g needle.
What is the smallest gauge size for industrial piercing?
Body Piercing Standard Gauges:
| Piercing | Standard Gauge |
|---|---|
| Tongue Piercing | 14G |
| Cartilage Piercing | 16G , 18G |
| Eyebrow Piercing | 16G (14G is also commonly used) |
| Industrial Barbell | 14G (16G is also commonly used) |
How do I know what gauge my industrial piercing is?
Piercing Gauge Sizes
- BCR: Measure the width of the bar.
- Labret: Measure the width of the bar.
- Barbell: Measure the width of the bar.
- Septum Ring: Measure the width of the ring at its thickest section.
- Tunnels & Plugs: Measure the circumference of the inside of your ear.
Can u pierce your nipples at home?
Make sure you get your nipple piercing done by a licensed professional in a clean studio. Never pierce your own nipple or let a friend do it. … Nipple piercing equipment and rings are sterilized in a machine called an autoclave.
Can your nipples be too big to pierce?
The nipple is fleshy enough to be pierced securely behind plenty of skin to prevent rejection. That doesn’t mean a nipple piercing can‘t reject jewelry, though, especially if it’s not done properly in the first place. If the jewelry gauge is too thin or the piercing isn’t deep enough, you run the risk of rejection.
How many mm is 6g?
| gauge | inches decimal | millimeters |
|---|---|---|
| 8g | 0.129″ | 3.264 mm |
| 6g | 0.162″ | 4.115 mm |
| 0.188″ | 4.762 mm | |
| 4g | 0.204″ | 5.189 mm |
