Is my ear suitable for an industrial piercing?

Most people’s ears are suitable to get an industrial piercing. However some people’s ears don’t have a prominent ridge on the upper part of the ear. If your ear has a prominent ridge that runs from the upper part of the ear to about midway then you should be able to get an industrial no problem.

>> Click to read more <<

Likewise, can small ears get industrial piercing?

The look of an industrial piercing greatly depends on the anatomy of your ear. If you have a smaller ear, you might not be able to accommodate the industrial piercing. … Additionally, it might not make a great first piercing. Healing cartilage is more susceptible to issues like cartilage bumps or hypertrophic scarring.

Accordingly, what side do you get an industrial piercing? There’s no “right” choice. You can have your right ear, left ear, or both ears pierced. It just depends on your preference. Here’s one important factor to consider: If you’re a side sleeper, you may want to pierce the ear opposite the side you typically sleep on.

Moreover, can you put regular earrings in an industrial piercing?

Common gauges, lengths, and jewelry: The most common gauge to get pierced with is a 14GA. … Straight barbells aren’t necessarily the only piece of jewelry that can be put in your Industrial piercing; you can even put a hoop in each piercing hole, or even two studs, as long as the barbell is the right gauge.

Are industrial piercings worth it?

It may seem like a lot, but I can promise that all of the work is absolutely worth it. I am in love with my industrial, so much so that even a year later I find myself admiring it. If you’re thinking about doing it, go for it!

What size do they pierce your industrial with?

Standard piercing sizes

Piercing Standard Gauge Standard Length
Tongue Piercing 14G 5/8″
Cartilage Piercing 16G , 18G 3/16″ , 1/4″ and 5/16″
Eyebrow Piercing 16G (14G is also commonly used) 1/4″ , 5/16″ and 3/8″
Industrial Barbell 14G (16G is also commonly used) 1 1/2″ (varies)

How painful is industrial piercing?

Industrial piercings are moderately painful. While they tend to hurt more than standard lobe piercings, they’re still much less painful than piercings on more sensitive areas. … The initial piercing pain is a sharp pain, like a hard pinch, and you may also experience some pain as the jewelry is pushed in place.

Can you do industrial piercing yourself?

Industrial piercings A.K.A scaffold consists of two piercings connected with a single bar. Selfpiercing is not advisable but if you are confident of pulling it off then here’s how.

What does an industrial piercing say about you?

Industrial Piercing

You tend to draw people in with your charming personality, but you only have a few very close friends. You‘re less likely to get hurt that way, because you may look all rough and tumble, but you‘re a big softy on the inside.

Are industrial piercings hard to heal?

The difficulty of an industrial piercing to heal also makes it much more painful in the long run. You’ll find that it is tender for longer than most other piercings and because it is more likely to get infected your healing time may be longer.

How do you shower with an industrial piercing?

It’s perfectly safe to continue showering and washing your hair while your piercing heals. You may want to opt for a natural shampoo if the chemicals are irritating the area. Otherwise, simply take extra care to thoroughly rinse the soap and shampoo from in and around the piercing.

Why do they call it an industrial piercing?

The industrial piercing is really two piercings in one: an outer helix piercing connected to a forward helix piercing by a straight barbell. This piercing was named and popularized by Erik Dakota in the early nineties. Like all cartilage piercings, the suggested healing time is six months to a year. …

Do industrial piercing get infected easily?

Industrial piercings are more prone to infection because there are 2 wounds, and the tension placed on the skin from the jewelry also increases inflammation and vulnerability to the skin. An infection occurs when harmful bacteria build up in one or both of the holes where your ear is pierced.

What is the smallest gauge for an industrial piercing?

Body Piercing Standard Gauges:

Piercing Standard Gauge
Industrial Barbell 14G (16G is also commonly used)
Labret Lip Rings 14G or 16G
Monroe Piercing 16G
Nipple Piercing 14G

Leave a Reply