Standard ear piercings are a 20g or 18g if they were pierced by a gun. If they were pierced by a professional, the lobe piercing will typically be a 16g or 14g. After a minimum of two months it is typically safe to change the jewelry, but the piercing may still feel sensitive.
Likewise, how do I know what gauge my piercing is?
You can use the following methods to measure the gauge of your piercing jewellery:
- BCR: Measure the width of the bar.
- Labret: Measure the width of the bar.
- Barbell: Measure the width of the bar.
- Septum Ring: Measure the width of the ring at its thickest section.
Though it seemingly goes against logic, earrings and other jewelry gauge sizes actually get bigger the lower the number of the gauge. An 18 gauge, one of the smallest gauges, is actually smaller than a 16 gauge earring, with the largest gauges being 0, 00, and 000 gauge jewelry.
Also to know is, is 14g bigger than 16g?
Jewelry is measured through a gauge system (see chart below). The higher the gauge number the smaller the wire is. A standard “earring” is usually 20 gauge. Jewelry gauges/sizes can vary between manufacturers.
Gauge | Millimeter | Inch |
---|---|---|
16g | 1.2mm | 3/64″ |
14g | 1.6mm | 1/16″ |
12g | 2mm | 5/64″ |
10g | 2.4mm | 3/32″ |
Can I put a 16g in a 14g piercing?
Yes all day you can. However, the 16g post is thinner than the 14g. Downsizing is not an issue unless you’ve got a large collection of 14g jewelry that you wish to wear again. Downsizing to 16g is safe as long as it is healed.
What size gauge is normal earring?
20G
How big is a 14 gauge piercing?
1.6 millimeters
What is bigger a 20 or 18 gauge?
Gauges get larger with decreasing number (i.e. a size 00G is massive compared to a 20 gauge). with an 18 gauge. If you want it smaller, ask for a 20 or even 22 gauge when getting pierced.
How big is a 16 gauge earring?
Inches & Millimeters Gauge Conversion Chart:
Gauge | Inches | Millimeters |
---|---|---|
20G | .032″ | 0.81mm |
18G | .040″ | 1.0mm |
16G | .050″ | 1.2mm |
14G | .064″ | 1.6mm |
Can I put a 20g in a 16g piercing?
yes you can. When learning about piercings sizes you will know that the bigger the number the smaller the gauge of the piercing so yes you may use an 18g. the 18g is smaller than the 16g. Just be aware though that sometimes user smaller jewelry could cause your jewelry to get accustomed to that size.
What size gauge is a industrial piercing?
14G
Piercing | Standard Gauge | Standard Length |
---|---|---|
Industrial Barbell | 14G (16G is also commonly used) | 1 1/2″ (varies) |
Labret Lip Rings | 14G or 16G | 1/4″ , 5/16″, and 3/8″ |
Monroe Piercing | 16G | 1/4″ , 5/16″ and 3/8″ |
Nipple Piercing | 14G | 3/8″ , 1/2″, 9/16″ |
What size is after 1/2 inch gauges?
Convert Ear Gauge to mm and Inch
Millimeters (mm) | Inches (“) |
---|---|
11mm | 7/16″ |
12mm | 1/2″ |
13mm | 17/32″ |
14mm | 9/16″ |