Gauges get larger with decreasing number (i.e. a size 00G is massive compared to a 20 gauge). with an 18 gauge. If you want it smaller, ask for a 20 or even 22 gauge when getting pierced.
Secondly, how do I know what gauge my piercing is?
You can use the following methods to measure the gauge of your piercing jewellery:
- BCR: Measure the width of the bar.
- Labret: Measure the width of the bar.
- Barbell: Measure the width of the bar.
- Septum Ring: Measure the width of the ring at its thickest section.
Though it seemingly goes against logic, earrings and other jewelry gauge sizes actually get bigger the lower the number of the gauge. An 18 gauge, one of the smallest gauges, is actually smaller than a 16 gauge earring, with the largest gauges being 0, 00, and 000 gauge jewelry.
Also to know is, can I put a 14G in a 16G piercing?
14g jewelry is larger than 16g jewelry, but you might be able to fit it. … The size difference between the two is small, but if you go back and forth it would obviously be a stretch every time you wanted to wear the 14’s, since your ear would shrink back to a 16g while you had that jewelry in.
How big is a 14 gauge piercing?
1.6 millimeters
What thickness is 14 gauge?
15 U.S. Code § 206. Standard gauge for sheet and plate iron and steel
| Number of gauge | Approximate thickness in fractions of an inch | Weight per square foot in pounds avoirdupois |
|---|---|---|
| 13 | 3/32 | 3.75 |
| 14 | 5/64 | 3.125 |
| 15 | 9/128 | 2.8125 |
| 16 | 1/16 | 2.5 |
What is the smallest gauge size?
The sizes range from millimeter measurements to inch measurements. The smallest gauge, 20, measures 0.88 millimeters or 1/32 inch. The bigger the gauge, the smaller the numbers get.
What size gauge is a normal earring?
20G
Is 14G bigger than 16g?
Jewelry is measured through a gauge system (see chart below). The higher the gauge number the smaller the wire is. A standard “earring” is usually 20 gauge. Jewelry gauges/sizes can vary between manufacturers.
| Gauge | Millimeter | Inch |
|---|---|---|
| 16g | 1.2mm | 3/64″ |
| 14g | 1.6mm | 1/16″ |
| 12g | 2mm | 5/64″ |
| 10g | 2.4mm | 3/32″ |
