Circular barbells, labret studs, and captive rings all work well in industrial piercing holes if you do not want to wear a standard barbell. There’s also a really neat piece of jewelry called a spiral that can be twisted in and out of both holes to wrap around the top of the ear.
Subsequently, why you shouldn’t get an industrial piercing?
The industrial barbell gets easily entangled in hair, which may then pull against the jewelry. In cartilage piercings, it’s very easy to damage the skin, causing complications like hypertrophic scarring. For this reason, some opt for cartilage studs while their industrial piercing heals.
| Industrial piercing, scaffold piercing | |
|---|---|
| Location | Ear cartilage |
| Jewelry | Straight barbell |
Regarding this, what is the normal size for an industrial piercing?
Are industrial piercings worth it?
Industrial piercings look absolutely awesome, but you have to take very good care of them. Cartilage piercings generally take longer to heal, and an industrial is two piercings rather than one. Stick to what your piercer says in terms of when you can take it out, and add a couple of weeks, just to be on the safe side.
Should I move my industrial piercing while cleaning it?
–Never spin the jewelry, move it back and forth, or move it while you’re cleaning it. The jewelry may feel tight or like it’s not moving around and that is OK.
What does an industrial piercing say about you?
Industrial Piercing
You tend to draw people in with your charming personality, but you only have a few very close friends. You‘re less likely to get hurt that way, because you may look all rough and tumble, but you‘re a big softy on the inside.
Do industrial piercings get infected easily?
An industrial piercing can describe any two pierced holes connected by a single barbell. It usually refers to double perforation on the cartilage at the top of your ear. Cartilage piercings — particularly those high on your ear — are more prone to infection than other ear piercings.
Can you do industrial piercing yourself?
Industrial piercings A.K.A scaffold consists of two piercings connected with a single bar. Self–piercing is not advisable but if you are confident of pulling it off then here’s how.
Can I remove my industrial piercing?
Removing an industrial piercing is an easy enough process that you could potentially do it at home, but Cox, Faris, and Green all agree the best thing to do is to get it removed by a professional. “Typically, one or both ends of the barbell will thread off allowing it to slide out,” Faris notes.
How bad is an industrial piercing?
Industrial piercings are moderately painful. While they tend to hurt more than standard lobe piercings, they’re still much less painful than piercings on more sensitive areas. … The initial piercing pain is a sharp pain, like a hard pinch, and you may also experience some pain as the jewelry is pushed in place.
Can I sleep on my industrial piercing?
You want to avoid sleeping on an industrial piercing because it adds additional pressure on the jewelry. It will be more likely to have scarring if you sleep on it.
Are there different size industrial bars?
The standard measure of the industrial barbell
Because every ear is different, the room between the two piercing holes differs from person to person. … For small ears, there are also many industrial barbells available with a length of 35 to 32 mm.
What size bar is used for industrial piercing?
Standard Piercing Sizes
| Piercing | Standard Gauge | Standard Length |
|---|---|---|
| Industrial Barbell | 14G (16G is also commonly used) | 1 1/2″ (varies) |
| Labret Lip Rings | 14G or 16G | 1/4″ , 5/16″, and 3/8″ |
| Monroe Piercing | 16G | 1/4″ , 5/16″ and 3/8″ |
| Nipple Piercing | 14G | 3/8″ , 1/2″, 9/16″ |
What is the smallest gauge size for industrial piercing?
Body Piercing Standard Gauges:
| Piercing | Standard Gauge |
|---|---|
| Tongue Piercing | 14G |
| Cartilage Piercing | 16G , 18G |
| Eyebrow Piercing | 16G (14G is also commonly used) |
| Industrial Barbell | 14G (16G is also commonly used) |
