Despite what most people may think, even your standard ear lobe piercings should be executed by a professional. … Standard ear piercings are a 20g or 18g if they were pierced by a gun. If they were pierced by a professional, the lobe piercing will typically be a 16g or 14g.
Thereof, what is 20G earring?
20G (0.81mm) Most earlobe piercings are made with a 20G needle, as are some nose piercings. 18G (1.0mm) An 18G needle can be used for earlobe piercings, nose piercings, as well as some cartilage piercings (e.g. forward helix). 18G earrings are great for many healed cartilage piercings.
Correspondingly, can you pierce cartilage with 20G?
Any standard size earring or post will fit you. If you‘ve been pierced with a needle in a piercing shop, most likely you‘re at a 20 or 18 gauge. No worries! The smaller the gauge the bigger the hole, so any standard size earring can be worn in addition to 20 or 18 gauge captive rings, cartilage studs, etc.
Can I put a 20G in a 16G piercing?
If you pierce yourself with a 16G and put in a 20G earring, the earring will fit in easily and the hole will eventually shrink to the right size.
What is the smallest earring size?
These 1mm (1/32 inch in Diameter) Nose Studs / Ball Stud Earrings are smallest possible size and are barely larger than the ear posts themselves.
What size are piercing earrings?
“For piercings in general, 18 g through 16 g is the most common. For nipple or naval piercings, 14 g through 12 g is most common. For larger gauges—like stretched ear lobes—the smallest gauge usually starts at size 8 and goes up from there.”
How do you tell what size your piercing is?
To find out the best internal diameter you should measure from the piercing hole to the edge of your lip / ear / nose. The length measurement refers to the length of the jewelry bar. Not the length of the whole product. The length of the barbell is measured as the distance between the two balls at either end.
Can I put a 14g in a 16g piercing?
14g jewelry is larger than 16g jewelry, but you might be able to fit it. Yes, you can stretch you piercing to a 14g just make sure that the jewelry that you’re buying is suitable for a freshly stretching piercing.
What gauge earring should I get?
Standard piercing sizes
| Piercing | Standard Gauge | Standard Length |
|---|---|---|
| Nipple Piercing | 14G | 3/8″ , 1/2″, 9/16″ |
| Tragus / Helix / Rook / Conch / Daith | 16G , 18G | 3/16″, 1/4″ , 5/16″ and 3/8″ |
| Septum | 14G (16G is also commonly used) | 3/8″, 7/16″, 1/2″, and 5/8″ |
| Ear | 20G and 18G |
How do you know what gauge your earring is?
The gauge is how thick your jewelry is. Jewelry gets thicker the smaller the number gets. For example, an 18 gauge nose stud is thicker than a 22 gauge nose stud. You will see gauge written like this: 16G, 16g, and 16 gauge.
What is bigger a 20 or 18 gauge?
The higher the number, the smaller the gauge. If your piercing is a 18 gauge then the 20 gauge would be slightly smaller.
Can I wear a smaller gauge earring?
Yes you can. The jewellery won’t be very snug, though, and might move around a lot. Having said that, the whole will probably close up a bit around the smaller gauge jewellery so you might not be able to wear 14g there any more.
How do you widen a piercing?
Simply wrap one layer (or more) of tape around the jewelry and re-insert it into the piercing. You will repeat this method over time, gradually adding more tape and thus increasing the size of the hole. But not just any tape will do.
How can I widen my helix piercing?
First, take a hot shower, and massage the area. This will help the cartilage stretch easier by pulling more blood into the area! Next, once you’re out of the shower of course, take the taper and try to insert it. If it doesn’t easily go in, remove it and put the lube on the taper and on your ear!
