Cleaning too often with an overly harsh cleaning solution, or with too many different types of cleaning solutions, can irritate your piercing. … Salt water and/or saline solutions should be used to irrigate your piercing, but it is the action of flushing out the wound that helps healing, not the saline itself.
Besides, do I clean the inside of my nose piercing?
Here’s the good news: Even though a nose piercing takes a while to heal (more on that in a sec), you really only need to clean it a few times each day. “I recommend doing a saline rinse twice a day—on the inside and the outside of your nose,” says Ava Lorusso, professional piercer at Studs in NYC.
Considering this, can I clean my nose piercing with just water?
Cleaning process
A person can clean a nose piercing by soaking the piercing site in warm saline water and keeping it submerged in the water for 3–5 minutes. A small mug or eggcup works well to hold the saline.
What to clean a new piercing with?
Wash with warm water and gentle soap before you touch your piercing to avoid introducing bacteria to the area. Clean with a clean cotton pad or swab, dipped in rubbing alcohol. Use this around the pierced area a few times a day to remove any bacteria.
Can I use tap water to clean my piercing?
Distilled water is best, and bottled water is a second choice; depending on your local water quality, you may need to avoid tap water unless it is filtered or first brought to a full boil for a minute or longer and then allowed to cool sufficiently before use.
How do I clean the inside of my nose piercing?
You just use a sea salt water solution to gently clean, disinfect, and remove crusts. Do this twice a day until your piercing has completely healed. Do not remove jewelry when cleaning your nose piercing during the healing phase, and always wash your hands before touching the jewelry or nose piercing wound.
What’s the best thing to clean a nose piercing with?
Your piercer will recommend a saline rinse to use at least twice per day. You may also consider using your own DIY sea salt rinse, or even tea tree oil if your nose is especially tender. You’ll also want to make sure you leave the original jewelry in place until the piercing heals.
What are the signs of a healing nose piercing?
After getting a nose piercing, it’s normal to have some swelling, redness, bleeding, or bruising for a few weeks. As your piercing starts to heal, it’s also typical for: the area to itch. whitish pus to ooze from the piercing site.
Can I UsE regular salt instead of sea salt to clean my piercing?
Do not use table salt, kosher salt, Epsom salts, or iodized sea salts. Non-iodized fine-grain sea salt is best for avoiding additives, as well as its ability to dissolve into a solution. Do not make the solution too salty, as that can be irritating to the piercing and to the skin.
Can I use Himalayan salt for saline solution for piercings?
1/4 tsp of non-iodised fine grain salt(not regular sea salt, pink Himalayan salt works too) to one cup of pre-boiled warm water is the perfect ratio. Too much salt can irritate your healing piercing. A fresh batch of saline solution should be made fresh daily but a solution can be safety stored for up to 2-3 days.
Is hot water good for piercings?
You want enough friction to clean it, but not too much that you cause trauma to the piercing. If you must rotate your jewelry to clean, grab the jewelry and not the piercing. The hot water will also open your capillaries/pores and help flush the area out and bring in oxygen which helps healing.
Can I use Dove soap to clean my nose piercing?
DON’T Use Harsh Chemicals
No tea tree oil, alcohol, peroxide, antibacterial soap, or ointments. DO NOT use moisturizing soaps like Dove and Olay or antibacterials like Dial. These soap additives leave a residue that builds up in piercing and can contribute to irritation bumps.
How do I clean my nose piercing with antibacterial soap?
(ie, Phisoderm, Bactine, or liquid antibacterial soaps such as Dial, Lever 2000, or Softsoap) and avoid perfumed products. Dilute 50/50 with water if irritation occurs. Leave the cleanser on the skin for 3 minutes; lather and work the ring back and forth through the piercing half a dozen times.
