Industrial piercings A.K.A scaffold consists of two piercings connected with a single bar. Self–piercing is not advisable but if you are confident of pulling it off then here’s how.
Also, can you get an industrial piercing without the bar?
If it’s not a bar, it’s not really called an industrial piercing and you‘re left with different kinds of piercings. That said, only a bar can be used for this certain type of pierce. The good news is, you can find many different and unique jewelries to suit your style.
Herein, is my ear big enough for an industrial piercing?
The look of an industrial piercing greatly depends on the anatomy of your ear. If you have a smaller ear, you might not be able to accommodate the industrial piercing. … Additionally, it might not make a great first piercing. Healing cartilage is more susceptible to issues like cartilage bumps or hypertrophic scarring.
Do industrial piercings get infected easily?
Industrial piercings are more prone to infection because there are 2 wounds, and the tension placed on the skin from the jewelry also increases inflammation and vulnerability to the skin. An infection occurs when harmful bacteria build up in one or both of the holes where your ear is pierced.
What else can I put in my industrial piercing?
Alternatives to an Industrial Piercing bar
- Anti-helix-piercing.
- Anti-tragus-piercing.
- Conch-piercing.
- Daith-piercing.
- Rook-piercing.
- Scapha-piercing.
- Snug-piercing.
- Vertical-helix-piercing.
Can I put hoops in my industrial piercing?
Straight barbells aren’t necessarily the only piece of jewelry that can be put in your Industrial piercing; you can even put a hoop in each piercing hole, or even two studs, as long as the barbell is the right gauge.
Which ear should I get my industrial piercing on?
There’s no “right” choice. You can have your right ear, left ear, or both ears pierced. It just depends on your preference. Here’s one important factor to consider: If you’re a side sleeper, you may want to pierce the ear opposite the side you typically sleep on.
Does Claire’s do industrial piercing?
Our ear piercing earrings are individually packaged and pre-sterilized at a state of the art facility. … There’s no need to make an appointment, just visit your local Claire’s Store and one of our Ear Piercing Specialists will assist you. …
Do piercings look trashy?
You can look trashy with a single piercing to person A, while you won’t seem trashy to person B even with multiple ear piercings. However, in certain conditions you may look trashy to everyone. That’s when you wear really cheap earrings in those multiple piercings.
Are industrial piercings hard to heal?
The difficulty of an industrial piercing to heal also makes it much more painful in the long run. You’ll find that it is tender for longer than most other piercings and because it is more likely to get infected your healing time may be longer.
What ears can’t get industrial piercing?
If your ear has a prominent ridge that runs from the upper part of the ear to about midway then you should be able to get an industrial no problem. However if you have an ear type where the upper part of the ear is mostly or entirely flat then an industrial will probably not work out for you.
What size do they pierce your industrial with?
Standard piercing sizes
| Piercing | Standard Gauge | Standard Length |
|---|---|---|
| Tongue Piercing | 14G | 5/8″ |
| Cartilage Piercing | 16G , 18G | 3/16″ , 1/4″ and 5/16″ |
| Eyebrow Piercing | 16G (14G is also commonly used) | 1/4″ , 5/16″ and 3/8″ |
| Industrial Barbell | 14G (16G is also commonly used) | 1 1/2″ (varies) |
Can you sleep on an industrial piercing?
Can I sleep on my industrial piercing? You want to avoid sleeping on an industrial piercing because it adds additional pressure on the jewelry. It will be more likely to have scarring if you sleep on it.
