This is a popular piece of body jewelry because it conveniently allows the wearer to remove the ring by simply removing the captive bead, the bead is held firmly in place so that it will not easily fall out.
Moreover, how do you measure a captive bead ring?
To size a captive ring, two measurements are needed: the gauge size and the diameter of the ring. The gauge size is the thickness of the ring itself (the part that actually goes in your piercing), and the diameter is found by measuring across the widest part of the ring from one inside edge to the other.
- Grab the jewelry by ring with the index and thumb of one hand.
- Grab the bead or ball with the index and thumb of the other hand.
- Pull and apply force in opposite directions causing the tension that the ring has on the ball or bead to break.
- Once the ball or bead is free, rotate the jewelry out.
Also to know is, how do you open captive bead ring?
How do you secure a captive bead ring?
Traditional captive bead rings, or CBRs, hold a bead in place using the ring’s own tension/pressure. The rounded ends of the captive bead ring fit into two little dimpled indentations on either side of the captive bead to hold it in place.
How do you open a segment ring without pliers?
How do you unscrew a stuck ball piercing?
A pair of latex or rubber gloves will usually provide enough grip to unscrew a stuck piercing ball. Make sure the jewelry is completely dry and grab the ball with your gloved hand. The bit of extra torque from the rubber gloves might provide just the right amount of traction to get your ball unstuck.
How do you put a captive bead ring on your lip?
The gap in the ring where the bead will sit should be wide enough to slide over your lip. Once the end of the ring matches up with the piercing in your lip, slide it on through. Keep pushing the ring gently around until the gap in the ring is clearly visible in front of your lip. Push the captive bead into place.
What are captive hoops?
A captive bead ring (CBR), ball closure ring (BCR), captive hoop, or captive ball ring is a common example of body piercing jewelry. 1????? lt consists of a hoop with a captive bead that can be inserted and removed to open and close the ring.
How do you expand a captive bead ring?
Hold the ring steady with your free hand and push the captive bead into the open segment of the ring. The captive bead should pop into place. If the open segment is too narrow, you can use the ring opening pliers to expand it slightly.
