This is a popular piece of body jewelry because it conveniently allows the wearer to remove the ring by simply removing the captive bead, the bead is held firmly in place so that it will not easily fall out.
Secondly, how do you measure a captive bead ring?
To size a captive ring, two measurements are needed: the gauge size and the diameter of the ring. The gauge size is the thickness of the ring itself (the part that actually goes in your piercing), and the diameter is found by measuring across the widest part of the ring from one inside edge to the other.
Additionally, how do Captive ball rings work?
When you push the ball into the ring, the pieces retract to allow the ball to fit in place. … The rounded ends of the captive bead ring fit into two little dimpled indentations on either side of the captive bead to hold it in place. Tension-style captive rings typically have a gap that’s 1mm smaller than the ball size.
How do you open a segment ring without pliers?
How do you expand a captive bead ring?
Hold the ring steady with your free hand and push the captive bead into the open segment of the ring. The captive bead should pop into place. If the open segment is too narrow, you can use the ring opening pliers to expand it slightly.
Can you put a 16g earring in an 18g hole?
If I pierce with a 16g needle, can I use 18g jewelry? Yes you can, in fact that’s typically what a piercer will do, especially with cartilage piercings. They pierce with a gauge size bigger than the actual jewelry. It allows room for swelling and placing the jewelry.
Can I put a 14g in a 16g piercing?
14g jewelry is larger than 16g jewelry, but you might be able to fit it. Yes, you can stretch you piercing to a 14g just make sure that the jewelry that you’re buying is suitable for a freshly stretching piercing. … It would just irritate the piercing even if it is fully healed.
What is bigger 16 gauge or 14 gauge?
16ga steel is . 065” inches thick, that is about 1/16th of an inch thick. 14 gauge in comparison is . 083 inches thick which doesn’t sound like much except it is almost 30% thicker (27.6% to be exact).
How do you put a captive bead ring on a helix?
Captive bead rings are a common style of body jewelry that can be really irritating to insert and remove if you have never done it before. Just make sure you line up one of the dimples of the bead with the edge of one side of the ring, and then push the second dimple right into the ring and you have done it.
How do you unscrew a stuck ball piercing?
A pair of latex or rubber gloves will usually provide enough grip to unscrew a stuck piercing ball. Make sure the jewelry is completely dry and grab the ball with your gloved hand. The bit of extra torque from the rubber gloves might provide just the right amount of traction to get your ball unstuck.
What do you do if you lose your piercing ball?
