The industrial piercing is really two piercings in one: an outer helix piercing connected to a forward helix piercing by a straight barbell. … While popular, this piercing doesn’t work for all ears, as you need to have a defined helix, or ear “ridge,” and enough space for the barbell to sit unobstructed.
Keeping this in consideration, is my ear too small for industrial piercing?
The look of an industrial piercing greatly depends on the anatomy of your ear. If you have a smaller ear, you might not be able to accommodate the industrial piercing. … If you’ve had problems healing cartilage in the past, then it’s a good idea to talk to your piercer before pursuing the industrial piercing.
Also question is, can you fix uneven ear piercings?
If your holes are uneven, the only way to correct the problem is to have them re-pierced. Healing generally takes six to eight weeks, and the earrings must be removed.
What ears can’t get industrial piercing?
If your ear has a prominent ridge that runs from the upper part of the ear to about midway then you should be able to get an industrial no problem. However if you have an ear type where the upper part of the ear is mostly or entirely flat then an industrial will probably not work out for you.
What size do they pierce your industrial with?
Standard piercing sizes
| Piercing | Standard Gauge | Standard Length |
|---|---|---|
| Tongue Piercing | 14G | 5/8″ |
| Cartilage Piercing | 16G , 18G | 3/16″ , 1/4″ and 5/16″ |
| Eyebrow Piercing | 16G (14G is also commonly used) | 1/4″ , 5/16″ and 3/8″ |
| Industrial Barbell | 14G (16G is also commonly used) | 1 1/2″ (varies) |
Do industrial piercings get infected easily?
Industrial piercings are more prone to infection because there are 2 wounds, and the tension placed on the skin from the jewelry also increases inflammation and vulnerability to the skin. An infection occurs when harmful bacteria build up in one or both of the holes where your ear is pierced.
What piercings look good with industrial?
15 Industrial Piercing Ideas That Rock
- a beautifully accessorized ear with three lobe piercings, a tragus and an industrial one all done with similar studs and a bar.
- a bold ear with four lobe piercings, a daith piercing and an industrial one with shiny earrings and a bar.
Are industrial piercings worth it?
It may seem like a lot, but I can promise that all of the work is absolutely worth it. I am in love with my industrial, so much so that even a year later I find myself admiring it. If you’re thinking about doing it, go for it!
Is industrial piercing for guys?
Industrial piercings are a popular cartilage piercing for guys and girls alike.
What does an industrial piercing say about you?
Industrial Piercing
You tend to draw people in with your charming personality, but you only have a few very close friends. You‘re less likely to get hurt that way, because you may look all rough and tumble, but you‘re a big softy on the inside.
Why do my earring holes turn black?
Is there a weird dark spot around your piercing? The cause of a gray or black piercing hole is usually jewelry made with improper or inferior metals that turn your skin black, gray, bluish-gray, or grayish-black in color. “Argyria” is the proper term for this condition caused by exposure to silver or silver compounds.
Are double pierced ears unprofessional?
Are multiple ear piercings unprofessional? If you usually wear enough piercings to set off a metal detector, cut down to wearing just one or two sets of earrings at work. Too many earrings, as well as unconventional piercings, such as an orbital and forward helix, are not suited for professional workplaces.
Can ears be Repierced in the same spot?
Scar tissue tends to be weaker than normal tissue, so if the piercing is completely healed inside and out your piercer will most likely want to pierce you in a slightly different location. It can be right beside the scar tissue though, so almost in the same spot.
