| GAUGE | COMMON PIERCINGS |
|---|---|
| 20G (0.81mm) | Most earlobe piercings are made with a 20G needle, as are some nose piercings. |
| 18G (1.0mm) | An 18G needle can be used for earlobe piercings, nose piercings, as well as some cartilage piercings (e.g. forward helix). 18G earrings are great for many healed cartilage piercings. |
Moreover, what is a 20 gauge needle used for piercing?
20 Gauge– 20 G is about 0.8mm. This is the smallest type of hollow needle. It is used in Ear and Nose piercing. Some people prefer to be pierced with 20 G needle.
In this way, what’s the smallest piercing needle?
Common Piercing Type
For larger gauges—like stretched ear lobes—the smallest gauge usually starts at size 8 and goes up from there.” Here is how gauges compare to diameters in inches and millimeters: 18 gauge = 0.04 inches or 1.0 millimeters. 14 gauge = 1/16-inch or 1.6 millimeters.
Can I put a 14g in a 16g piercing?
14g jewelry is larger than 16g jewelry, but you might be able to fit it. Yes, you can stretch you piercing to a 14g just make sure that the jewelry that you’re buying is suitable for a freshly stretching piercing.
What is smaller 20 gauge or 18 gauge?
The higher the number, the smaller the gauge. If your piercing is a 18 gauge then the 20 gauge would be slightly smaller.
How do they pierce ears with a needle?
If you are using a hollow piercing needle, thread the jewelry through the center of the needle. Put the earring in your ear. After you’ve pierced your ear, and while the needle is sticking through the ear, place the shaft of the earring into the hollow tube of the needle and then push it all the way through the ear.
What is a 20 gauge piercing in MM?
| gauge | inches decimal | millimeters |
|---|---|---|
| 20g | 0.032″ | 0.812 mm |
| 18g | 0.040″ | 1.024 mm |
| 16g | 0.051″ | 1.291 mm |
| 0.062″ | 1.587 mm |
What size needle is used for cartilage piercing?
For tragus, anti-tragus, helix, rook, conch and most cartilage piercings (any part of the ear other than your lobe) a piercer will use an 18 gauge (as seen above) or 16 gauge needle. Depending on the anatomy of your ear, the piercer may use a 14 gauge needle as well.
Can I put a 20g in a 16g piercing?
yes you can. When learning about piercings sizes you will know that the bigger the number the smaller the gauge of the piercing so yes you may use an 18g. the 18g is smaller than the 16g. Just be aware though that sometimes user smaller jewelry could cause your jewelry to get accustomed to that size.
How far apart should ear piercings be?
Therefore, the stud will take up 6-6.5mm on each side of the piercing hole. So the second piercing should be at least 8mm away from the center of the first hole, so the jewelry in the first and second holes do not touch. Even spacing between ear lobe holes two and up the ear is a matter of style.
What size gauge is a piercing gun?
20-gauge
Can I use a sewing needle to pierce my ear?
It can be dangerous to pierce your ear with a sewing needle if you don’t do it right, but nevertheless, it is done by a lot of people. With the appropriate sewing needle and the correct way of numbing your ear, you can easily pierce your ear.
Can you put a 16g earring in an 18g hole?
If I pierce with a 16g needle, can I use 18g jewelry? Yes you can, in fact that’s typically what a piercer will do, especially with cartilage piercings. They pierce with a gauge size bigger than the actual jewelry. It allows room for swelling and placing the jewelry.
Why do piercing needles have holes?
Getting Pierced with a Needle
The needle is hollow and has a sharp point to create a clean hole. Since the needle is hollow, it removes a small amount of skin and tissue in the immediate area of the piercing wound, and creates a space for the jewelry to rest, allowing room for the wound to drain and to heal.
