To find out the best internal diameter you should measure from the piercing hole to the edge of your lip / ear / nose. The length measurement refers to the length of the jewelry bar. Not the length of the whole product. The length of the barbell is measured as the distance between the two balls at either end.
Also to know is, can I put a 14g in a 16G piercing?
Can I put a 14g belly ring into a 16g hole? Potentially yes if your piercing is fully healed. But it’s going to be a tight fit. If you want to experiment then it usually works better if you try after you’ve had a bath and dried off, as its usually easier to put piercings in at this time.
Hereof, what is the standard length of a lip bar?
Standard piercing sizes
| Piercing | Standard Gauge | Standard Length |
|---|---|---|
| Labret Lip Rings | 14G or 16G | 1/4″ , 5/16″, and 3/8″ |
| Monroe Piercing | 16G | 1/4″ , 5/16″ and 3/8″ |
| Nipple Piercing | 14G | 3/8″ , 1/2″, 9/16″ |
| Tragus / Helix / Rook / Conch / Daith | 16G , 18G | 3/16″, 1/4″ , 5/16″ and 3/8″ |
What is the best size for a lip ring?
Gauges: For the fastest, most seamless healing process, Thompson recommends piercing with a 16 or 18 gauge and using a titanium or gold metal. Studs: “People do anchors in their lip, surface barbells, studs on the top, bottom, center, side—there are a lot [of options],” Thompson says.
What’s the smallest lip ring size?
What size are lip piercings? There is two main barbell gauge sizes for lip piercings : 1,2mm(16G) and 1,6mm(14G) (barbell diameter).
Can I put a 20g in a 16g piercing?
Yes you can, in fact that’s typically what a piercer will do, especially with cartilage piercings. … Generally a piercer will use an 18f needle and use a 20g stud if it’s your ears for example. Take a look at this photo for example: The difference between 16g and 18g is about .
Can I start stretching with a 14 gauge?
14 gauge is a good size to start if you have worn regular earrings daily for a long time. The difference is pretty small between the 2 sizes, but you for sure don’t want to push it too hard on your 1st stretch (since your ears have never been stretched before).
Is 18g smaller than 16g?
An 18 gauge, one of the smallest gauges, is actually smaller than a 16 gauge earring, with the largest gauges being 0, 00, and 000 gauge jewelry.
Is 14g or 16g better for septum?
There’s almost no difference between 14g and 16g and going between the 2 sizes once your healed shouldn’t honestly be too much of an issue. 16g jewelry is usually cheaper especially when you get into BVLA gold clickers and what not.
What’s smaller than a 14 gauge?
14 gauge = 1/16-inch or 1.6 millimeters. 8 gauge = 1/8-inch or 3.2 millimeters. 2 gauge = 1/4-inch or 6.5 millimeters. 0 gauge = 5/16-inch or 8.3 millimeters.
What is the smallest gauge size?
The smallest gauge, 20, measures 0.88 millimeters or 1/32 inch. The bigger the gauge, the smaller the numbers get.
