You can use the following methods to measure the gauge of your piercing jewellery:
- BCR: Measure the width of the bar.
- Labret: Measure the width of the bar.
- Barbell: Measure the width of the bar.
- Septum Ring: Measure the width of the ring at its thickest section.
Likewise, people ask, is a 16 gauge piercing big?
Common Piercing Type
“For piercings in general, 18 g through 16 g is the most common. For nipple or naval piercings, 14 g through 12 g is most common. For larger gauges—like stretched ear lobes—the smallest gauge usually starts at size 8 and goes up from there.”
Secondly, is 16G smaller than 14G?
As the numbers go up the size gets smaller. … The lower the number, the thicker the gauge so 16g is thinner than a 14g.
Can I put a 14g in a 16g piercing?
14g jewelry is larger than 16g jewelry, but you might be able to fit it. Yes, you can stretch you piercing to a 14g just make sure that the jewelry that you’re buying is suitable for a freshly stretching piercing.
What is smaller than a 16 gauge?
An 18 gauge, one of the smallest gauges, is actually smaller than a 16 gauge earring, with the largest gauges being 0, 00, and 000 gauge jewelry.
Can I put a 20g in a 16g piercing?
Yes you can, in fact that’s typically what a piercer will do, especially with cartilage piercings. … Generally a piercer will use an 18f needle and use a 20g stud if it’s your ears for example. Take a look at this photo for example: The difference between 16g and 18g is about .
Is 20g smaller than 16g?
Internationally, gauge is measured in millimeters (mm). Please refer to the metric conversion chart below.
| Gauge | Inches | Millimeters |
|---|---|---|
| 20G | .032″ | 0.81mm |
| 18G | .040″ | 1.0mm |
| 16G | .050″ | 1.2mm |
| 14G | .064″ | 1.6mm |
Can I put a 16g in an 18g piercing?
Yes you can, in fact that’s typically what a piercer will do, especially with cartilage piercings. They pierce with a gauge size bigger than the actual jewelry. It allows room for swelling and placing the jewelry.
Is 16 gauge normal for ear piercing?
Standard ear piercings are a 20g or 18g if they were pierced by a gun. If they were pierced by a professional, the lobe piercing will typically be a 16g or 14g. After a minimum of two months it is typically safe to change the jewelry, but the piercing may still feel sensitive.
What is a good size for hoop earrings?
20mm to 40mm
What is the smallest earring size?
These 1mm (1/32 inch in Diameter) Nose Studs / Ball Stud Earrings are smallest possible size and are barely larger than the ear posts themselves.
Can I put a 14g in a 12g piercing?
As for going from 12g to 14g for nipples, it’s fine. 14g is stable as well, but your piercing fistulas will shrink around the jewelry so you’ll have to stretch if you ever plan on going back up to 12g.
Does 14g hurt more than 16g?
No, there is no difference in pain between 16g and 14g.
Is 14g or 16g better for septum?
There’s almost no difference between 14g and 16g and going between the 2 sizes once your healed shouldn’t honestly be too much of an issue. 16g jewelry is usually cheaper especially when you get into BVLA gold clickers and what not.
