As a general rule of thumb, you should wait a minimum of 3-4 months before stretching a fresh soft tissue piercing, and healed ear lobe piercings can often be stretched at the rate of one size (about 1mm to 1.5mm or 1/16″) each 30 to 45 days, minimum.
Similarly, how long do you leave tapers in before putting plugs in?
Generally, you need to wait at least 3-4 months before gauging the fresh plug piercing, after it’s initially done. Then, you‘ll have to take breaks of at least 1 month between other 1-sized stretches.
In this regard, how do you stretch a piercing?
Simply wrap one layer (or more) of tape around the jewelry and re-insert it into the piercing. You will repeat this method over time, gradually adding more tape and thus increasing the size of the hole. But not just any tape will do. What you are using to wrap should be inert and free of adhesives.
Can I leave tapers in overnight?
If it’s too tight, what you’ll do is tear the skin off the inside of your hole. This is painful and incredibly unpleasant and bloody. Repeat until you get the taper all the way in. Leave it for at least a couple of hours, ideally overnight.
Does stretching a piercing hurt?
Stretching with a taper
First, apply 3-5 drops of oil to the front and back of your piercing and gently slide the stretching taper in until you experience mild discomfort. … It’s normal for your piercing to feel uncomfortable for a few days, and you might also experience throbbing pain, itching or swelling.
Is there a half size between 0g and 00g?
The half size between 0g and 00g is 9mm and is occasionally called 00g.
What is the next size up from 7 16 gauges?
Ear Gauge to MM Conversion Table
| Millimeters(mm) | Inches |
|---|---|
| 11 mm | 7/16“ |
| 12 mm | 1/2″ |
| 14 mm | 9/16″ |
| 16 mm | 5/8″ |
When can I wear silicone tunnels after stretching?
Silicone plugs are great for healed stretched piercings and other large piercings because they’re so comfy and lightweight. But always make sure you wait until after the piercing has calmed down and properly healed after stretching!
Why is the jump from 8g to 6G so big?
It’s probably for 2 reasons. First off, there’s a larger size jump between 8g and 6g. Up until 8g, there is only a difference of 0.6mm or less in between each size. After 8g, the differences get larger, and there is a 1 mm size difference between 8g and 6g.
How do you fix a blowout without downsizing?
How to Avoid & Heal an Ear Stretching Blowout
- Downsize to relieve pressure. …
- Let your ear heal for 1 to 2 weeks. …
- Massage your ears for 5 to 10 minutes every night. …
- Be consistent. …
- Tuck blowout. …
- Stretch slowly: one size at a time. …
- Give your ears at least 4 to 6 weeks to heal in between stretching. …
- Lubricate!
Can I put a 16G in a 20G piercing?
Whenever piercing ears, I recommend getting a needle that is a bit larger than your earring gauge, because otherwise the earring is harder to put in. If you pierce yourself with a 16G and put in a 20G earring, the earring will fit in easily and the hole will eventually shrink to the right size.
Can I put a 14g in a 16G piercing?
14g jewelry is larger than 16g jewelry, but you might be able to fit it. Yes, you can stretch you piercing to a 14g just make sure that the jewelry that you’re buying is suitable for a freshly stretching piercing.
Can I put a thicker nose ring in?
You could really mess up your nose if you do. You need to go to a piercer for this. The process is very simple: a taper the thickness of your current piercing hole on one end, and a size up on the other, will be lubricated and gently pushed through the piercing, stretching the hole bigger.
