according to a [rather good] piercing site, the average length for a [healed] labret bar is 9mm.
Consequently, how do I know what size labret to buy?
To measure a labret you simply have to measure the barbell length excluding the platform base and screw head if there is one. For labret piercing, ring size vary between 8mm(0,31in) and 11mm(0,43in). 8mm(0,31in) and 9mm (0,35in) tend to be the most common sizes for this piercing.
Secondly, how should a labret stud fit?
Labret– Labret piercings should be fitted by a piercer, and should be a fairly snug fit. With studs, they back disc may sink slightly into the lip tissue, commonly called nesting. This is normal, and as long as its easy and comfortable to pop the disc out, totally safe.
Do labret piercings ruin your teeth?
The location of the labret makes the jewelry particularly susceptible to chomping, which can break your front teeth. Since you’ll have to wear a larger labret stud during the first few weeks, you’ll need to take extra care during this time.
Do lip piercings make your lips look bigger?
Tips and Tricks
Dahlia piercings will emphasize the corners of your mouth, and has the effect of making full lips look fuller, but thin lips look particularly long and thin.
What size labret do they pierce with?
16 gauge
Can I put a 16g in a 14g piercing?
Yes all day you can. However, the 16g post is thinner than the 14g. Downsizing is not an issue unless you’ve got a large collection of 14g jewelry that you wish to wear again. Downsizing to 16g is safe as long as it is healed.
What size is a labret piercing?
Labret usually refers to a piercing that is below the bottom lip, above the chin. The most common gauges for a labret piercing are 16ga or 14ga. The thickness of your lips should determine the length of your labret. The most common length is 3/8 inch but 5/16 inch and 7/16 inch are common as well.
Can you put a labret in your lobe?
Labrets are backward!
Because labrets are designed to wear in your lip, it makes sense that they would insert from the back (the inside of your mouth). But, wearing them in your earlobes means you have to put them in backward (pushing the post through your piercing behind your ear).
Can I wear a labret stud in my nose?
Yes, you can! In fact, some people find labret-style piercing jewelry more comfortable to wear than the typical nostril screw because the flat backing sits flush against the inside of the nose.
How do you unscrew a labret stud?
Hold the flat disc on the back of the labret stud with one hand or use your teeth to keep it steady. Grip the outside part of the stud with your other hand and unscrew it counterclockwise until the ball comes off. Remove the piercing by gently pulling the disc up and out of your mouth.
How painful is a labret piercing?
Vertical labret pain
Everyone’s pain tolerance is different. Most people don’t report a ton of pain with the vertical lip piercing. Some have rated it around a 4 on a scale of 1 to 10. It may hurt more than ear, nose, or other piercings because the tissue around your mouth is sensitive and dense with nerve endings.
Is it normal for a lip piercing to sink into your lip?
If the back part of the labret is digging into your lip a bit, it’s normal. It’ll indent in the front too a bit. Fresh piercings up to 5 weeks will tend to do that. … If the swelling gets too bad or if it’s pushing into your lip too much, go see your piercer.
What can you not do after getting your lip pierced?
During healing:
Refrain from using lipstick, lip gloss, and other lip products. You may need to toss any products that you use while the infection is active. Avoid sharing food and drinks to minimize the spread of infectious bacteria. Avoid open-mouth kissing and oral sex to reduce the transfer of bacteria and saliva.
