JEWELRY TYPE
| Standard Hoop Inner Diameter | |
|---|---|
| Ear Cartilage (Helix, Tragus, Lobe, etc.) | 5/16″ (8mm) |
| Earlobe (Main, 2nd, 3rd) | 5/16″ (8mm) |
| Earhead, Thin Helix (Hole near the edge) | 1/4″ (6-6.5mm) |
| Conch | 3/8″-1/2″ (10mm-12mm) |
Keeping this in consideration, what kind of earring do you use for a tragus piercing?
What Type of Jewelry Is Used for Tragus Piercing?
- Stud: Small and simple, studs are a great option for tragus piercings, which tend to be tiny. …
- Barbell: A barbell is an earring with balls on both ends and a bar in the center.
Though it seemingly goes against logic, earrings and other jewelry gauge sizes actually get bigger the lower the number of the gauge. An 18 gauge, one of the smallest gauges, is actually smaller than a 16 gauge earring, with the largest gauges being 0, 00, and 000 gauge jewelry.
Subsequently, is 16 gauge normal for ear piercing?
Standard ear piercings are a 20g or 18g if they were pierced by a gun. If they were pierced by a professional, the lobe piercing will typically be a 16g or 14g. After a minimum of two months it is typically safe to change the jewelry, but the piercing may still feel sensitive.
Can your tragus be too small to pierce?
It’s uncommon for a tragus to be too small, but it does happen. Trying to pierce this area can result in piercing behind the tragus if it is not large enough. This can affect your ability to chew.
What size is a normal tragus piercing?
Standard piercing sizes
| Piercing | Standard Gauge | Standard Length |
|---|---|---|
| Nipple Piercing | 14G | 3/8″ , 1/2″, 9/16″ |
| Tragus / Helix / Rook / Conch / Daith | 16G , 18G | 3/16″, 1/4″ , 5/16″ and 3/8″ |
| Septum | 14G (16G is also commonly used) | 3/8″, 7/16″, 1/2″, and 5/8″ |
| Ear | 20G and 18G |
What hurts more tragus or helix?
Different parts of the ear are bound to hurt more than others because the flesh varies – the ear lobe is generally considered the least painful piercing whereas cartilage piercings, like the helix, tragus, conch and so on – will usually be more painful because it’s tougher.
Can you wear a regular earring in your tragus?
It’s absolutely safe, however a regular ear piercing is typically 18 gauge in size where a Tragus is typically 16 gauge. When putting a smaller size piece of jewelry in your tragus piercing, the hold will slowly shrink to the size of the new ring.
Do you need special earrings for Tragus?
Tragus piercings are generally tiny and have sort of minimal wiggle room as opposed to earlobes. Things like earbuds may not fit if you use large earrings for your tragus. Avoid larger variations of cartilage earrings, hoops, and certain nose rings.
Can I put a 16G in a 14G piercing?
Yes all day you can. However, the 16g post is thinner than the 14g. Downsizing is not an issue unless you’ve got a large collection of 14g jewelry that you wish to wear again. Downsizing to 16g is safe as long as it is healed.
What is the smallest earring gauge size?
Common Piercing Type
For larger gauges—like stretched ear lobes—the smallest gauge usually starts at size 8 and goes up from there.” Here is how gauges compare to diameters in inches and millimeters: 18 gauge = 0.04 inches or 1.0 millimeters. 14 gauge = 1/16-inch or 1.6 millimeters.
Can you put a 18G earring in an 16G hole?
yes you can. When learning about piercings sizes you will know that the bigger the number the smaller the gauge of the piercing so yes you may use an 18g. the 18g is smaller than the 16g. Just be aware though that sometimes user smaller jewelry could cause your jewelry to get accustomed to that size.
Is 20G bigger than 16g?
Please refer to the metric conversion chart below.
| Gauge | Inches | Millimeters |
|---|---|---|
| 20G | .032″ | 0.81mm |
| 18G | .040″ | 1.0mm |
| 16G | .050″ | 1.2mm |
| 14G | .064″ | 1.6mm |
How many MM is a 10 gauge earring?
| gauge | inches decimal | millimeters |
|---|---|---|
| 12g | 0.081″ | 2.053 mm |
| 10g | 0.102″ | 2.588 mm |
| 0.125″ | 3.175 mm | |
| 8g | 0.129″ | 3.264 mm |
