JEWELRY TYPE
| Standard Hoop Inner Diameter | |
|---|---|
| Ear Cartilage (Helix, Tragus, Lobe, etc.) | 5/16″ (8mm) |
| Earlobe (Main, 2nd, 3rd) | 5/16″ (8mm) |
| Earhead, Thin Helix (Hole near the edge) | 1/4″ (6-6.5mm) |
| Conch | 3/8″-1/2″ (10mm-12mm) |
Moreover, what length is a tragus piercing?
TRAGUS / HELIX
The most common gauge for Tragus and Helix piercing is 16ga with a length of 1/4 inch.
Also, how do I know what gauge my piercing is?
You can use the following methods to measure the gauge of your piercing jewellery:
- BCR: Measure the width of the bar.
- Labret: Measure the width of the bar.
- Barbell: Measure the width of the bar.
- Septum Ring: Measure the width of the ring at its thickest section.
Can your tragus be too small to pierce?
It’s uncommon for a tragus to be too small, but it does happen. Trying to pierce this area can result in piercing behind the tragus if it is not large enough. This can affect your ability to chew.
What is the smallest gauge size for Tragus?
Post Length / Ring Diameter
| PIERCING TYPE | STANDARD GAUGE SIZE | STANDARD LENGTH |
|---|---|---|
| Tragus Piercing | 16G, 18G | 6mm, 8mm |
| Helix Piercing | 16G, 18G | 6mm, 8mm |
| Rook Piercing | 16G, 18G | 8mm, 10mm |
| Conch Piercing | 16G, 18G | 6mm, 8mm, 10mm |
Is piercing Tragus dangerous?
Tragus Piercing Risks
This isn’t a super risky piercing, but it still does have some risks you should be aware of. Any time you have cartilage pierced, you run the risk of a harder-to-treat infection should one develop. In addition, cartilage piercings can easily form hypertrophic scarring around the piercing site.
Can you wear a regular earring in your tragus?
It’s absolutely safe, however a regular ear piercing is typically 18 gauge in size where a Tragus is typically 16 gauge. When putting a smaller size piece of jewelry in your tragus piercing, the hold will slowly shrink to the size of the new ring.
Can I stretch my tragus piercing?
You can stretch your tragus, conch, flat, as well as any helix piercing. BUT, when stretching cartilage you need to be aware that once it heals, the stretch is permanent! … Septum piercings should be done through the flesh below the cartilage in your nose, not through the cartilage.
Can I put a 14G in a 16G piercing?
14g jewelry is larger than 16g jewelry, but you might be able to fit it. … The size difference between the two is small, but if you go back and forth it would obviously be a stretch every time you wanted to wear the 14’s, since your ear would shrink back to a 16g while you had that jewelry in.
How many MM is a 10 gauge earring?
| gauge | inches decimal | millimeters |
|---|---|---|
| 12g | 0.081″ | 2.053 mm |
| 10g | 0.102″ | 2.588 mm |
| 0.125″ | 3.175 mm | |
| 8g | 0.129″ | 3.264 mm |
What is bigger 12 or 14 gauge piercing?
When discussing gauges, references to a “larger gauge” means bigger around, not a bigger number. That is to say that if you’re told that you need a larger gauge than 14, you need to look at 12 or 10 which are wider, not at 16.
What is smaller 20 gauge or 18 gauge?
Gauges get larger with decreasing number (i.e. a size 00G is massive compared to a 20 gauge). with an 18 gauge. If you want it smaller, ask for a 20 or even 22 gauge when getting pierced.
Can I put a 16 gauge in a 18 gauge hole cartilage?
Yes you can, in fact that’s typically what a piercer will do, especially with cartilage piercings. They pierce with a gauge size bigger than the actual jewelry. It allows room for swelling and placing the jewelry.
