There is a long-standing myth that you should rotate your piercing after being pierced and during cleaning. This is not factual, and it is false information. The more that the piercing is moved the more you are delaying healing! You are going to want to “baby” your piercing through the entire healing process.
Also question is, do I have the ear shape for an industrial piercing?
The industrial piercing is really two piercings in one: an outer helix piercing connected to a forward helix piercing by a straight barbell. … While popular, this piercing doesn’t work for all ears, as you need to have a defined helix, or ear “ridge,” and enough space for the barbell to sit unobstructed.
In respect to this, what does an industrial piercing symbolize?
Industrial Piercing
You tend to draw people in with your charming personality, but you only have a few very close friends. You’re less likely to get hurt that way, because you may look all rough and tumble, but you’re a big softy on the inside.
Can I push my industrial piercing?
It can be frustrating when your body rejects a piercing, but there’s no danger other than scarring (unless there’s a severe infection). The best thing to do is prevent the jewelry from pushing itself through the skin’s surface.
Is industrial piercing worth it?
Industrial piercings look absolutely awesome, but you have to take very good care of them. Cartilage piercings generally take longer to heal, and an industrial is two piercings rather than one.
What ears can’t get industrial piercing?
If your ear has a prominent ridge that runs from the upper part of the ear to about midway then you should be able to get an industrial no problem. However if you have an ear type where the upper part of the ear is mostly or entirely flat then an industrial will probably not work out for you.
Which ear should I get an industrial piercing?
The traditional version of an industrial piercing consists of a helix (or outer, upper ear) piercing linked to a forward helix (or inner, upper ear) piercing by a barbell.
What piercings look good with industrial?
15 Industrial Piercing Ideas That Rock
- a beautifully accessorized ear with three lobe piercings, a tragus and an industrial one all done with similar studs and a bar.
- a bold ear with four lobe piercings, a daith piercing and an industrial one with shiny earrings and a bar.
What is the normal size for an industrial piercing?
Standard piercing sizes
| Piercing | Standard Gauge | Standard Length |
|---|---|---|
| Industrial Barbell | 14G (16G is also commonly used) | 1 1/2″ (varies) |
| Labret Lip Rings | 14G or 16G | 1/4″ , 5/16″, and 3/8″ |
| Monroe Piercing | 16G | 1/4″ , 5/16″ and 3/8″ |
| Nipple Piercing | 14G | 3/8″ , 1/2″, 9/16″ |
What are piercing balls called?
sotal piercings
What is the curved barbell called?
ez-bar
Do piercings look trashy?
You can look trashy with a single piercing to person A, while you won’t seem trashy to person B even with multiple ear piercings. However, in certain conditions you may look trashy to everyone. That’s when you wear really cheap earrings in those multiple piercings.
How painful is industrial piercing?
Industrial piercings are moderately painful. While they tend to hurt more than standard lobe piercings, they’re still much less painful than piercings on more sensitive areas. … The initial piercing pain is a sharp pain, like a hard pinch, and you may also experience some pain as the jewelry is pushed in place.
Are industrial piercings unprofessional?
If a prospective employer focuses more on a piece of metal in your ear, IMHO they aren’t a place I want to spend most of my waking hours. But, if you’re desperate for a job and live in a conservative place, of course it is possible that such piercings may be perceived as unprofessional.
