Gauge Size
| GAUGE | COMMON PIERCINGS |
|---|---|
| 20G (0.81mm) | Most earlobe piercings are made with a 20G needle, as are some nose piercings. |
| 18G (1.0mm) | An 18G needle can be used for earlobe piercings, nose piercings, as well as some cartilage piercings (e.g. forward helix). 18G earrings are great for many healed cartilage piercings. |
Herein, how big is a 20 gauge piercing needle?
Gauge to Millimeters Conversion
| Gauge | Inches | Millimeters |
|---|---|---|
| 20G | .032″ | 0.81mm |
| 18G | .040″ | 1.0mm |
| 16G | .050″ | 1.2mm |
| 14G | .064″ | 1.6mm |
For larger gauges—like stretched ear lobes—the smallest gauge usually starts at size 8 and goes up from there.” Here is how gauges compare to diameters in inches and millimeters: 18 gauge = 0.04 inches or 1.0 millimeters. 14 gauge = 1/16-inch or 1.6 millimeters.
Just so, what is a 20 gauge piercing in MM?
| gauge | inches decimal | millimeters |
|---|---|---|
| 20g | 0.032″ | 0.812 mm |
| 18g | 0.040″ | 1.024 mm |
| 16g | 0.051″ | 1.291 mm |
| 0.062″ | 1.587 mm |
Can I put a 20G in a 16g piercing?
yes you can. When learning about piercings sizes you will know that the bigger the number the smaller the gauge of the piercing so yes you may use an 18g. the 18g is smaller than the 16g. Just be aware though that sometimes user smaller jewelry could cause your jewelry to get accustomed to that size.
What can I pierce with a 16 gauge needle?
16 Gauge– It is a 1.3mm hollow needle. This is an ideal piercing size and is used in a number of piercings. It is used in piercings Like- Cartilage, Eyebrow, Monroe, Tragus, Helix, Conch, and Rook piercing as well.
Can I put a 14g in a 16g piercing?
14g jewelry is larger than 16g jewelry, but you might be able to fit it. Yes, you can stretch you piercing to a 14g just make sure that the jewelry that you’re buying is suitable for a freshly stretching piercing.
What is a 20 gauge piercing?
What Gauge is an Ear or Nose Piercing? At Pagoda, ear piercing is done using 20 gauge piercing earrings. … This is the gauge commonly used for nose piercings as well. Larger gauges, usually 14–18, are used for other areas like the belly button, lip, tongue and eyebrow.
What size hoop should I get for my cartilage?
JEWELRY TYPE
| Standard Hoop Inner Diameter | |
|---|---|
| Ear Cartilage (Helix, Tragus, Lobe, etc.) | 5/16″ (8mm) |
| Earhead, Thin Helix (Hole near the edge) | 1/4″ (6-6.5mm) |
| Conch | 3/8″-1/2″ (10mm-12mm) |
| Nose | 5/16″ (8mm) |
Can I use a sewing needle to pierce my ear?
It can be dangerous to pierce your ear with a sewing needle if you don’t do it right, but nevertheless, it is done by a lot of people. With the appropriate sewing needle and the correct way of numbing your ear, you can easily pierce your ear.
Can you put a 16g earring in an 18g hole?
If I pierce with a 16g needle, can I use 18g jewelry? Yes you can, in fact that’s typically what a piercer will do, especially with cartilage piercings. They pierce with a gauge size bigger than the actual jewelry. It allows room for swelling and placing the jewelry.
Can you use a 14G needle to pierce your nose?
But the biggest needle that is used for the nose piercing is 14G or 1.0 mm, which is very common for nose piercing. If you want to use big size jewelry for your earlobe then a 14G size needle is a good choice. … because this size of the needle is less painful and best for regular fit jewelry.
How do I measure my piercing size?
The barbell length is measured in a straight line across the center, between the end balls. The post length is measured in a straight line, between the top ball and the base. The inner diameter is measured in a straight line across the center, inside the ring.
Is 3mm bigger than 5mm?
1mm = just over 1/32 inch. 2mm = just over 1/16 inch. 3mm = almost 1/8 inch. … 5mm = just over 3/16 inch.
How do I know what size my piercing is?
To find out the best internal diameter you should measure from the piercing hole to the edge of your lip / ear / nose. The length measurement refers to the length of the jewelry bar. Not the length of the whole product. The length of the barbell is measured as the distance between the two balls at either end.
