For the majority of people, either 16 gauge or 14 gauge is a good starting point if you have only worn regular earrings. 16 gauge is a good starting point if you never wear earrings or if you have recently had them pierced and they are just healed up.
Similarly, how do you start gauging your ears?
How to Start Stretching Your Ears
- Step One: Pierce Your Ears. This is an obvious first step, but you will need to have your ears pierced if you don’t already have them done. …
- Step Two: Gather Your Supplies. …
- Step Three: Stretch Your Ears! …
- Step Four: Let the Stretch Heal. …
- Step Five: Repeat. …
- Step Six: Cleaning and Care.
Likewise, people ask, what gauge is a normal earring?
Any standard size earring or post will fit you. If you’ve been pierced with a needle in a piercing shop, most likely you’re at a 20 or 18 gauge. No worries! The smaller the gauge the bigger the hole, so any standard size earring can be worn in addition to 20 or 18 gauge captive rings, cartilage studs, etc.
Can I use Vaseline to gauge my ears?
Stretching Process (taper method)
Lubricant will make the taper super slick, so it will slide through easy. Lubricants make a stretch easier. While you’re out getting a new taper, get some Jojoba oil, Vitamin E oil or GaugeGear Stretching Balm (Neosporin and Vaseline are not good lubes for ear stretching).
Does gauging your ears hurt?
Is ear stretching painful? Ear stretching should not be too painful. Yes, there will be some discomfort, but your ears should not be screaming in pain. If this is so please go to your local piercer for care.
What is an ear blowout?
A blowout is one of the most common complications of ear gauging. It’s a ring of scar tissue that forms behind the jewelry and gives the piercing the appearance of turning inside out. Blowouts usually occur from trying to stretch the hole too quickly. They often cause sharp pain and inflammation.
How can I make gauging less painful?
First, apply 3-5 drops of oil to the front and back of your piercing and gently slide the stretching taper in until you experience mild discomfort. If your skin turns white around the taper, back the taper up slightly – a white ring of skin is a sign that you’re stretching too fast!
Can I leave tapers in overnight?
If it’s too tight, what you’ll do is tear the skin off the inside of your hole. This is painful and incredibly unpleasant and bloody. Repeat until you get the taper all the way in. Leave it for at least a couple of hours, ideally overnight.
What size is after 1/2 inch gauges?
Convert Ear Gauge to mm and Inch
| Millimeters (mm) | Inches (“) |
|---|---|
| 10mm | 3/8″ |
| 11mm | 7/16″ |
| 12mm | 1/2“ |
| 13mm | 17/32″ |
Can I put a 14g in a 16g piercing?
14g jewelry is larger than 16g jewelry, but you might be able to fit it. Yes, you can stretch you piercing to a 14g just make sure that the jewelry that you’re buying is suitable for a freshly stretching piercing.
When should I gauge up?
It is recommended that you wait at least 6 weeks in between stretches. This will give your earlobes time to heal up and become a little loose. However, we recommend that you wait 2-6 months between each stretch.
