Standard piercing sizes
| Piercing | Standard Gauge | Standard Length |
|---|---|---|
| Industrial Barbell | 14G (16G is also commonly used) | 1 1/2″ (varies) |
| Labret Lip Rings | 14G or 16G | 1/4″ , 5/16″, and 3/8″ |
| Monroe Piercing | 16G | 1/4″ , 5/16″ and 3/8″ |
| Nipple Piercing | 14G | 3/8″ , 1/2″, 9/16″ |
Then, how do I know what size labret to buy?
To measure a labret you simply have to measure the barbell length excluding the platform base and screw head if there is one. For labret piercing, ring size vary between 8mm(0,31in) and 11mm(0,43in). 8mm(0,31in) and 9mm (0,35in) tend to be the most common sizes for this piercing.
In this way, which is smaller 16G or 14G?
Jewelry is measured through a gauge system (see chart below). The higher the gauge number the
| Gauge | Millimeter | Inch |
|---|---|---|
| 16g | 1.2mm | 3/64″ |
| 14g | 1.6mm | 1/16″ |
| 12g | 2mm | 5/64″ |
| 10g | 2.4mm | 3/32″ |
Do labret piercings ruin your teeth?
The location of the labret makes the jewelry particularly susceptible to chomping, which can break your front teeth. Since you’ll have to wear a larger labret stud during the first few weeks, you’ll need to take extra care during this time.
What is an Ashley piercing?
As one of the few true lip piercings, the Ashley piercing consists of a single puncture through the center of the lower lip, exiting through the back of the lip into the mouth. … The Ashley piercing typically uses a labret stud with a dainty charm, ball, or gemstone sitting on the lower lip.
How snug should a labret stud be?
Labret– Labret piercings should be fitted by a piercer, and should be a fairly snug fit. With studs, they back disc may sink slightly into the lip tissue, commonly called nesting. This is normal, and as long as its easy and comfortable to pop the disc out, totally safe.
What is the smallest gauge for a labret piercing?
Body Piercing Standard Gauges:
| Piercing | Standard Gauge |
|---|---|
| Labret Lip Rings | 14G or 16G |
| Monroe Piercing | 16G |
| Nipple Piercing | 14G |
| Tragus / Helix / Rook / Conch | 16G , 18G |
What size belly bar should I get?
The default size for belly bars is 10 mm length and 1.6 mm thickness, which should be suitable for most belly button piercings. However, if you’re not sure what size you need you can measure the one you’re currently wearing. Despite the default thickness being 1.6 mm, some people prefer a 1.2 mm belly bar.
What’s smaller than a 14 gauge?
14 gauge = 1/16-inch or 1.6 millimeters. 8 gauge = 1/8-inch or 3.2 millimeters. 2 gauge = 1/4-inch or 6.5 millimeters. 0 gauge = 5/16-inch or 8.3 millimeters.
Can I put a 20g in a 16g piercing?
yes you can. When learning about piercings sizes you will know that the bigger the number the smaller the gauge of the piercing so yes you may use an 18g. the 18g is smaller than the 16g. Just be aware though that sometimes user smaller jewelry could cause your jewelry to get accustomed to that size.
What is the smallest gauge size?
The sizes range from millimeter measurements to inch measurements. The smallest gauge, 20, measures 0.88 millimeters or 1/32 inch. The bigger the gauge, the smaller the numbers get.
