Any standard size earring or post will fit you. If you’ve been pierced with a needle in a piercing shop, most likely you’re at a 20 or 18 gauge. No worries! The smaller the gauge the bigger the hole, so any standard size earring can be worn in addition to 20 or 18 gauge captive rings, cartilage studs, etc.
Simply so, what gauge is a earlobe piercing?
Gauge Size
| GAUGE | COMMON PIERCINGS |
|---|---|
| 20G (0.81mm) | Most earlobe piercings are made with a 20G needle, as are some nose piercings. |
| 18G (1.0mm) | An 18G needle can be used for earlobe piercings, nose piercings, as well as some cartilage piercings (e.g. forward helix). 18G earrings are great for many healed cartilage piercings. |
- BCR: Measure the width of the bar.
- Labret: Measure the width of the bar.
- Barbell: Measure the width of the bar.
- Septum Ring: Measure the width of the ring at its thickest section.
Regarding this, will an 18 gauge fit normal piercing?
Even if you have a piercing that was pierced to a standard size—generally 20 gauge, 18 gauge, and 16 gauge—you can still stretch your ears to a larger size. … Other commonly stretched piercings include the inner conch, septum, nose, belly button, tongue, and ear cartilage.
Can you put a 14G in a 16g?
Can I put a 14g belly ring into a 16g hole? Potentially yes if your piercing is fully healed. But it’s going to be a tight fit. If you want to experiment then it usually works better if you try after you‘ve had a bath and dried off, as its usually easier to put piercings in at this time.
What is the smallest earring size?
These 1mm (1/32 inch in Diameter) Nose Studs / Ball Stud Earrings are smallest possible size and are barely larger than the ear posts themselves.
Is 16g too big for lobe piercing?
16g is actually fairly standard, many people choose to start with much larger sizes, like 10g or 8g. You should definitely be pierced at 16g! Smaller sizes will leave you more susceptible to the “cheese cutter” effect (Google it if you want, but you are warned: it’s nasty).
What size gauge does Claire’s Pierce with?
At Claire’s we pride ourselves on providing a sterile and hygienic piercing service. All our ear piercings use a high quality Studex System 75 instrument.
Can I put a 20g in a 16g piercing?
Yes you can, in fact that’s typically what a piercer will do, especially with cartilage piercings. … Generally a piercer will use an 18f needle and use a 20g stud if it’s your ears for example. Take a look at this photo for example: The difference between 16g and 18g is about .
How big is a 16 gauge earring?
Inches & Millimeters Gauge Conversion Chart:
| Gauge | Inches | Millimeters |
|---|---|---|
| 20G | .032″ | 0.81mm |
| 18G | .040″ | 1.0mm |
| 16G | .050″ | 1.2mm |
| 14G | .064″ | 1.6mm |
What is smaller 20 gauge or 18 gauge?
The higher the number, the smaller the gauge. If your piercing is a 18 gauge then the 20 gauge would be slightly smaller.
Can I put a 16g in an 18g piercing?
Earlobes are pretty stretchy and if you’re accustomed to wearing heavier jewelry sometimes, you can probably fit 16g without any problems. I think they are 20g, but I’ve worn 18g NeoMetal labrets in my lobes for years now with no problem. … I have had my three lobe piercings for years.
Can you pierce lobes with 14g?
Standard ear piercings are a 20g or 18g if they were pierced by a gun. If they were pierced by a professional, the lobe piercing will typically be a 16g or 14g. After a minimum of two months it is typically safe to change the jewelry, but the piercing may still feel sensitive.
What size gauge will shrink back?
2 gauge
How do you enlarge earring holes?
Stretch the earring hole.
Using your fingers, gently pinch the sides of your earlobes and lightly pull in opposite directions. This will help the earring hole to open up slightly. This can help push some of the lubricant into the earring hole. Do not rub or pull on your lobes with too much force.
