Any standard size earring or post will fit you. If you’ve been pierced with a needle in a piercing shop, most likely you’re at a 20 or 18 gauge. No worries! The smaller the gauge the bigger the hole, so any standard size earring can be worn in addition to 20 or 18 gauge captive rings, cartilage studs, etc.
Considering this, is 16 gauge normal for ear piercing?
Standard ear piercings are a 20g or 18g if they were pierced by a gun. If they were pierced by a professional, the lobe piercing will typically be a 16g or 14g. After a minimum of two months it is typically safe to change the jewelry, but the piercing may still feel sensitive.
Though it seemingly goes against logic, earrings and other jewelry gauge sizes actually get bigger the lower the number of the gauge. An 18 gauge, one of the smallest gauges, is actually smaller than a 16 gauge earring, with the largest gauges being 0, 00, and 000 gauge jewelry.
Also know, which is thicker 14g or 16g?
is the 16g thicker than the 14g? They absolutely shouldn’t be. As the numbers go up the size gets smaller. 14 IS thicker than 16.
Can I put a 16g in a 14G piercing?
Yes all day you can. However, the 16g post is thinner than the 14g. Downsizing is not an issue unless you’ve got a large collection of 14g jewelry that you wish to wear again. Downsizing to 16g is safe as long as it is healed.
What is the smallest earring size?
1/32 inch
Is 20G bigger than 16G?
Please refer to the metric conversion chart below.
| Gauge | Inches | Millimeters |
|---|---|---|
| 20G | .032″ | 0.81mm |
| 18G | .040″ | 1.0mm |
| 16G | .050″ | 1.2mm |
| 14G | .064″ | 1.6mm |
What is the smallest gauge for cartilage earrings?
Standard piercing sizes
| Piercing | Standard Gauge | Standard Length |
|---|---|---|
| Cartilage Piercing | 16G , 18G | 3/16″ , 1/4″ and 5/16″ |
| Eyebrow Piercing | 16G (14G is also commonly used) | 1/4″ , 5/16″ and 3/8″ |
| Industrial Barbell | 14G (16G is also commonly used) | 1 1/2″ (varies) |
| Labret Lip Rings | 14G or 16G | 1/4″ , 5/16″, and 3/8″ |
What is the strongest gauge wire?
Therefore, 16 gauge wire is thicker than 19 gauge wire and so it is stronger, provided each sample of wire is made from the same material and is constructed in the same manner.
Can you put a 18G earring in an 16g hole?
yes you can. When learning about piercings sizes you will know that the bigger the number the smaller the gauge of the piercing so yes you may use an 18g. the 18g is smaller than the 16g. Just be aware though that sometimes user smaller jewelry could cause your jewelry to get accustomed to that size.
How big is a 14 gauge piercing?
1.6 millimeters
Is 18G or 20G smaller?
When choosing your items specifics from the drop down list, please note the following: 18G = 18 Gauge 20G= 20 Gauge 22G= 22 Gauge 14K= 14 Karat Solid Gold 18K= 18 Karat Solid Gold 24K= 24 Karat Solid Gold 1.5mm Gem= Gemstone measures approx 1.5 millimeters in size 2mm Gem= Gemstone measures approx 2 millimeters in size …
What is smaller 14g or 16g?
Jewelry is measured through a gauge system (see chart below). The higher the gauge number the
| Gauge | Millimeter | Inch |
|---|---|---|
| 16g | 1.2mm | 3/64″ |
| 14g | 1.6mm | 1/16″ |
| 12g | 2mm | 5/64″ |
| 10g | 2.4mm | 3/32″ |
What is the smallest gauge for belly rings?
Gauge – width of the shaft (eg. 14g)
| Gauge | Millimeter | Inches |
|---|---|---|
| 16g | 1.2mm | 3/64″ |
| 14g (standard) | 1.6mm | 1/16″ |
| 12g | 2mm | 5/64″ |
| 10g | 2.4mm | 3/32″ |
