| Piercing | Standard Gauge | Standard Length |
|---|---|---|
| Industrial Barbell | 14G (16G is also commonly used) | 1 1/2″ (varies) |
| Labret Lip Rings | 14G or 16G | 1/4″ , 5/16″, and 3/8″ |
| Monroe Piercing | 16G | 1/4″ , 5/16″ and 3/8″ |
| Nipple Piercing | 14G | 3/8″ , 1/2″, 9/16″ |
Accordingly, what needle do you use for an industrial piercing?
The most common industrial piercing connects the forward helix and the antihelix. The industrial jewelry lays across the top of the ear running horizontally. Industrial Piercing Process: This body piercing is typically performed with a hollow 14 or 16 gauge piercing needle.
| GAUGE | COMMON PIERCINGS |
|---|---|
| 20G (0.81mm) | Most earlobe piercings are made with a 20G needle, as are some nose piercings. |
| 18G (1.0mm) | An 18G needle can be used for earlobe piercings, nose piercings, as well as some cartilage piercings (e.g. forward helix). 18G earrings are great for many healed cartilage piercings. |
In this way, is a 14G or 16G bigger?
14g is bigger. The lower the number, the bigger the needle or jewelry. … So buy 16g jewelry and a 14g needle, or 14g jewelry and a 12g needle.
How badly does an industrial piercing hurt?
Industrial piercings are moderately painful. While they tend to hurt more than standard lobe piercings, they’re still much less painful than piercings on more sensitive areas. … The initial piercing pain is a sharp pain, like a hard pinch, and you may also experience some pain as the jewelry is pushed in place.
Can you put hoops in an industrial piercing?
Straight barbells aren’t necessarily the only piece of jewelry that can be put in your Industrial piercing; you can even put a hoop in each piercing hole, or even two studs, as long as the barbell is the right gauge.
Do you use the same needle for an industrial piercing?
One needle for the same piercing twice is fine, on the same person. You NEVER use a needle more than that. They can really hurt people. I‘ve heard the same thing from an APP shop near me.
Can I do industrial piercing at home?
Removing an industrial piercing is an easy enough process that you could potentially do it at home, but Cox, Faris, and Green all agree the best thing to do is to get it removed by a professional. “Typically, one or both ends of the barbell will thread off allowing it to slide out,” Faris notes.
Is an industrial piercing worth it?
The pain of going through the actual piercing is quick and over before you know it, but the soreness and tenderness sticks around. About a year, could be more, it all depends. I’ve had mine for over 5 years now, still love it and would do it again. Definitely worth it.
Can I put a 16g in a 14g piercing?
Yes all day you can. However, the 16g post is thinner than the 14g. Downsizing is not an issue unless you’ve got a large collection of 14g jewelry that you wish to wear again. Downsizing to 16g is safe as long as it is healed.
Can you put a 18g earring in an 16g hole?
yes you can. When learning about piercings sizes you will know that the bigger the number the smaller the gauge of the piercing so yes you may use an 18g. the 18g is smaller than the 16g. Just be aware though that sometimes user smaller jewelry could cause your jewelry to get accustomed to that size.
Is my Industrial 14g or 16g?
The 14g is a larger barbell than the 16g by a fraction of an inch (0.013). Most piercers will have a preference between 14 and 16g for industrial piercings and while having a 14g means you can swap out for 16g jewelry you cannot do it the other way around without pain.
Is 14g or 16g better for septum?
There’s almost no difference between 14g and 16g and going between the 2 sizes once your healed shouldn’t honestly be too much of an issue. 16g jewelry is usually cheaper especially when you get into BVLA gold clickers and what not.
What’s smaller than a 14 gauge?
14 gauge = 1/16-inch or 1.6 millimeters. 8 gauge = 1/8-inch or 3.2 millimeters. 2 gauge = 1/4-inch or 6.5 millimeters. 0 gauge = 5/16-inch or 8.3 millimeters.
