Gauge Size
| GAUGE | COMMON PIERCINGS |
|---|---|
| 20G (0.81mm) | Most earlobe piercings are made with a 20G needle, as are some nose piercings. |
| 18G (1.0mm) | An 18G needle can be used for earlobe piercings, nose piercings, as well as some cartilage piercings (e.g. forward helix). 18G earrings are great for many healed cartilage piercings. |
Keeping this in consideration, can I put a 16 gauge in a 18 gauge hole cartilage?
Yes you can, in fact that’s typically what a piercer will do, especially with cartilage piercings. They pierce with a gauge size bigger than the actual jewelry. It allows room for swelling and placing the jewelry.
Beside above, what size needle is used for helix piercing?
For tragus, anti-tragus, helix, rook, conch and most cartilage piercings (any part of the ear other than your lobe) a piercer will use an 18 gauge (as seen above) or 16 gauge needle. Depending on the anatomy of your ear, the piercer may use a 14 gauge needle as well.
What hurts more Helix or Tragus?
Different parts of the ear are bound to hurt more than others because the flesh varies – the ear lobe is generally considered the least painful piercing whereas cartilage piercings, like the helix, tragus, conch and so on – will usually be more painful because it’s tougher.
Is a forward helix piercing Dangerous?
Because your forward helix piercing is basically an open wound, trying to change the jewelry before it is fully healed will greatly irritate the site and will most likely lead to an infection.
Can I put a 14G in a 16g piercing?
14g jewelry is larger than 16g jewelry, but you might be able to fit it. … The size difference between the two is small, but if you go back and forth it would obviously be a stretch every time you wanted to wear the 14’s, since your ear would shrink back to a 16g while you had that jewelry in.
Can I put a 20G in a 16g piercing?
yes you can. When learning about piercings sizes you will know that the bigger the number the smaller the gauge of the piercing so yes you may use an 18g. the 18g is smaller than the 16g. Just be aware though that sometimes user smaller jewelry could cause your jewelry to get accustomed to that size.
Whats bigger 16g or 18g?
Internationally, gauge is measured in millimeters (mm).
| Gauge | Inches | Millimeters |
|---|---|---|
| 20G | .032″ | 0.81mm |
| 18G | .040″ | 1.0mm |
| 16G | .050″ | 1.2mm |
| 14G | .064″ | 1.6mm |
Is 14G bigger than 16G?
Jewelry is measured through a gauge system (see chart below). The higher the gauge number the smaller the wire is. A standard “earring” is usually 20 gauge. Jewelry gauges/sizes can vary between manufacturers.
| Gauge | Millimeter | Inch |
|---|---|---|
| 16g | 1.2mm | 3/64″ |
| 14g | 1.6mm | 1/16″ |
| 12g | 2mm | 5/64″ |
| 10g | 2.4mm | 3/32″ |
What gauge does Claire’s Pierce cartilage with?
Well, I just found out that Claire’s pierces with a 20 gauge and apparently the more common gauge for cartilage is 16.
Can you reuse piercing needles?
As a piercer, we don’t reuse needles even with the Autoclave. Please, I highly suggest you do not reuse needles. If you are concerned about sterilizing then purchase the pre sterilized needles. They should be stamped and dated.
Can you stretch a helix piercing?
You can stretch your tragus, conch, flat, as well as any helix piercing. BUT, when stretching cartilage you need to be aware that once it heals, the stretch is permanent! It will not shrink back down to its original size.
Is 18G smaller than 16G?
Though it seemingly goes against logic, earrings and other jewelry gauge sizes actually get bigger the lower the number of the gauge. An 18 gauge, one of the smallest gauges, is actually smaller than a 16 gauge earring, with the largest gauges being 0, 00, and 000 gauge jewelry.
How big should helix hoop be?
JEWELRY TYPE
| Standard Hoop Inner Diameter | |
|---|---|
| Ear Cartilage (Helix, Tragus, Lobe, etc.) | 5/16″ (8mm) |
| Conch | 3/8″-1/2″ (10mm–12mm) |
| Nose | 5/16″ (8mm) |
| Septum | 5/16″ (8mm) |
