At Pagoda, ear piercing is done using 20 gauge piercing earrings. These are among the smallest sizes and are designed to create small holes sized for standard pierced earrings. This is the gauge commonly used for nose piercings as well.
People also ask, are most earrings 20 gauge?
Figuring out what gauge your piercing is currently is a difficult thing to do but you can narrow down the possibilities by taking a standard earring bought in any department store and putting it in the piercing hole. Standard ear wires are 20 gauge. If it fits perfectly then your piercing is a 20 gauge.
Beside above, what gauge is a normal earring?
Any standard size earring or post will fit you. If you’ve been pierced with a needle in a piercing shop, most likely you’re at a 20 or 18 gauge. No worries! The smaller the gauge the bigger the hole, so any standard size earring can be worn in addition to 20 or 18 gauge captive rings, cartilage studs, etc.
What is bigger a 20 or 18 gauge?
The higher the number, the smaller the gauge. If your piercing is a 18 gauge then the 20 gauge would be slightly smaller.
What is the skinniest gauge?
8 gauge = 1/8-inch or 3.2 millimeters. 2 gauge = 1/4-inch or 6.5 millimeters. 0 gauge = 5/16-inch or 8.3 millimeters. 00 gauge = 3/8-inch or 9.3 millimeters.
What size is a 20 gauge earring?
| gauge | inches decimal | millimeters |
|---|---|---|
| 20g | 0.032″ | 0.812 mm |
| 18g | 0.040″ | 1.024 mm |
| 16g | 0.051″ | 1.291 mm |
| 0.062″ | 1.587 mm |
Can you put a 16 gauge earring in a 14 gauge hole?
Yes you can. The jewellery won’t be very snug, though, and might move around a lot. Having said that, the whole will probably close up a bit around the smaller gauge jewellery so you might not be able to wear 14g there any more.
How do you tell what gauge piercing you have?
The gauge is how thick your jewelry is. Jewelry gets thicker the smaller the number gets. For example, an 18 gauge nose stud is thicker than a 22 gauge nose stud. You will see gauge written like this: 16G, 16g, and 16 gauge.
What is the smallest earring size?
These 1mm (1/32 inch in Diameter) Nose Studs / Ball Stud Earrings are smallest possible size and are barely larger than the ear posts themselves.
Can I put a 20G in a 16G piercing?
If you pierce yourself with a 16G and put in a 20G earring, the earring will fit in easily and the hole will eventually shrink to the right size.
Can you put a 18G earring in an 16G hole?
yes you can. When learning about piercings sizes you will know that the bigger the number the smaller the gauge of the piercing so yes you may use an 18g. the 18g is smaller than the 16g. Just be aware though that sometimes user smaller jewelry could cause your jewelry to get accustomed to that size.
What does 18 gauge mean for earrings?
U.S. Gauge Conversion
The United States typically measures gauges in inches, unlike most other countries. In the U.S. an 18 gauge earring measures approximately 5/128-inch while a 16 gauge earring measures 3/64-inch, for a difference of 1/128-inch or approximately 0.0078 inches.
What is the smallest gauge for cartilage earrings?
Standard Piercing Sizes
| Piercing | Standard Gauge | Standard Length |
|---|---|---|
| Cartilage Piercing | 16G , 18G | 3/16″ , 1/4″ and 5/16″ |
| Eyebrow Piercing | 16G (14G is also commonly used) | 1/4″ , 5/16″ and 3/8″ |
| Industrial Barbell | 14G (16G is also commonly used) | 1 1/2″ (varies) |
| Labret Lip Rings | 14G or 16G | 1/4″ , 5/16″, and 3/8″ |
What’s the gauge size chart?
Ear Gauge to MM Conversion Table
| Gauge | Millimeters(mm) | Inches |
|---|---|---|
| 18g | 1.0 mm | 5/128″ |
| 16g | 1.2 mm | 3/64″ |
| 14g | 1.6 mm | 1/16″ |
| 12g | 2 mm | 5/64″ |
