14G
| Piercing | Standard Gauge | Standard Length |
|---|---|---|
| Industrial Barbell | 14G (16G is also commonly used) | 1 1/2″ (varies) |
| Labret Lip Rings | 14G or 16G | 1/4″ , 5/16″, and 3/8″ |
| Monroe Piercing | 16G | 1/4″ , 5/16″ and 3/8″ |
| Nipple Piercing | 14G | 3/8″ , 1/2″, 9/16″ |
Secondly, what is thicker 18G or 16G?
Gauge is the standard unit of measure for sheet steel and wire products. The lower the number, the thicker the steel. Therefore, 16 gauge is thicker than 18 gauge steel. … The thinner steel will be louder and higher pitched, whereas the 16 gauge will be a lower pitch and substantially quieter when struck.
| Gauge | Inches | Millimeters |
|---|---|---|
| 20G | .032″ | 0.81mm |
| 18G | .040″ | 1.0mm |
| 16G | .050″ | 1.2mm |
| 14G | .064″ | 1.6mm |
Correspondingly, what is 18G earring?
The gauge size of your piercing refers to the thickness of the earring post that goes through your ear. … An 18G needle can be used for earlobe piercings, nose piercings, as well as some cartilage piercings (e.g. forward helix). 18G earrings are great for many healed cartilage piercings.
Are there different size industrial bars?
Because every ear is different, the room between the two piercing holes differs from person to person. … For small ears, there are also many industrial barbells available with a length of 35 to 32 mm. Those lengths are also often used for vertical industrial barbells. The standard thickness is just 1.6 mm.
Can I put a 14g in a 16g piercing?
14g jewelry is larger than 16g jewelry, but you might be able to fit it. … The size difference between the two is small, but if you go back and forth it would obviously be a stretch every time you wanted to wear the 14’s, since your ear would shrink back to a 16g while you had that jewelry in.
Can I put a 20g in a 16g piercing?
yes you can. When learning about piercings sizes you will know that the bigger the number the smaller the gauge of the piercing so yes you may use an 18g. the 18g is smaller than the 16g. Just be aware though that sometimes user smaller jewelry could cause your jewelry to get accustomed to that size.
What is the smallest gauge for belly rings?
Gauge – width of the shaft (eg. 14g)
| Gauge | Millimeter | Inches |
|---|---|---|
| 16g | 1.2mm | 3/64″ |
| 14g (standard) | 1.6mm | 1/16″ |
| 12g | 2mm | 5/64″ |
| 10g | 2.4mm | 3/32″ |
What is the smallest gauge size?
The sizes range from millimeter measurements to inch measurements. The smallest gauge, 20, measures 0.88 millimeters or 1/32 inch. The bigger the gauge, the smaller the numbers get.
What gauge is a normal lobe earring?
Standard ear piercings are a 20g or 18g if they were pierced by a gun. If they were pierced by a professional, the lobe piercing will typically be a 16g or 14g.
Is 18G or 20G smaller?
When choosing your items specifics from the drop down list, please note the following: 18G = 18 Gauge 20G= 20 Gauge 22G= 22 Gauge 14K= 14 Karat Solid Gold 18K= 18 Karat Solid Gold 24K= 24 Karat Solid Gold 1.5mm Gem= Gemstone measures approx 1.5 millimeters in size 2mm Gem= Gemstone measures approx 2 millimeters in size …
What is the size of a normal earring in MM?
JEWELRY TYPE
| Standard Hoop Inner Diameter | |
|---|---|
| Ear Cartilage (Helix, Tragus, Lobe, etc.) | 5/16″ (8mm) |
| Earlobe (Main, 2nd, 3rd) | 5/16″ (8mm) |
| Earhead, Thin Helix (Hole near the edge) | 1/4″ (6-6.5mm) |
| Conch | 3/8″-1/2″ (10mm–12mm) |
