What is the standard size for a cartilage piercing?

Standard piercing sizes

Piercing Standard Gauge Standard Length
Cartilage Piercing 16G , 18G 3/16″ , 1/4″ and 5/16″
Eyebrow Piercing 16G (14G is also commonly used) 1/4″ , 5/16″ and 3/8″
Industrial Barbell 14G (16G is also commonly used) 1 1/2″ (varies)
Labret Lip Rings 14G or 16G 1/4″ , 5/16″, and 3/8″

>> Click to read more <<

Also question is, how do I know what size my piercing is?

You can use the following methods to measure the gauge of your piercing jewellery:

  1. BCR: Measure the width of the bar.
  2. Labret: Measure the width of the bar.
  3. Barbell: Measure the width of the bar.
  4. Septum Ring: Measure the width of the ring at its thickest section.
Likewise, people ask, how do you measure cartilage earring size? A simple way to work out the length is to put a standard earring against (not through) your earlobe and move the back to the right position, then take it away and measure the post to the butterfly back. If you measure with calipers remember that you don’t want the barbell to be too tight.

In this way, is 6mm too small for Helix?

For a short and snug fit, we recommend a 6mm length, if you have thicker cartilage or prefer to leave a bit of space either side then an 8mm may be better suited.

What size hoop is best for cartilage?

5/16”

Is a hoop or stud better for cartilage piercing?

Is a Hoop or Stud Better for Cartilage Piercings? It is always better to get a cartilage piercing initially done with a stud. It is easier for the piercing to heal on a long, straight post rather than a curved post.

What is bigger 12 or 14 gauge piercing?

When discussing gauges, references to a “larger gauge” means bigger around, not a bigger number. That is to say that if you’re told that you need a larger gauge than 14, you need to look at 12 or 10 which are wider, not at 16.

What is smaller 20 gauge or 18 gauge?

This will fit but may be slightly loose, as 20 gauge is thinner than 18 gauge. … The higher the number, the smaller the gauge. If your piercing is a 18 gauge then the 20 gauge would be slightly smaller.

Can I put a 14G in a 16g piercing?

14g is bigger then 16g. The lower the number the bigger it gets. If your piercing is healed and you’ve had it for a while you might be able to. There’s not a huge difference between the two, but it might be enough to keep it from going in.

How thick is ear cartilage?

Results: The average thickness of the cutis of normal auricles was 0.8 mm, the subcutis and the cartilage layer 0.6 mm thick on average.

Can you wear regular earrings in cartilage?

In some cases, you can use any type of earring for the cartilage piercing, such as hoops and posts. Yet, earrings made for cartilage are generally more comfortable. Cartilage earring types include: … Posts or studs: Posts or studs in all metal or metal with gem stones are suitable for cartilage piercings.

Can cartilage piercings shrink?

You can stretch your tragus, conch, flat, as well as any helix piercing. BUT, when stretching cartilage you need to be aware that once it heals, the stretch is permanent! It will not shrink back down to its original size.

How do I know what size my helix piercing is?

Just place your hoop on top of a ruler and count how many millimeters are inside of the hoop. This is the inner diameter. The hoop in the example picture has an 8mm (approx. 5/16”) inner diameter.

What size needle is used for helix piercing?

Gauge Size

GAUGE COMMON PIERCINGS
16G (1.2mm) A 16G needle is used for most cartilage piercings, including the tragus, helix, rook, conch and daith.

When should I downsize my helix piercing?

Your downsize is generally scheduled for anywhere between 2 – 8 weeks after having the piercing done, and in this time that channel won’t be entirely formed just yet and very, very delicate.

Leave a Reply