15 Industrial Piercing Ideas That Rock
- a beautifully accessorized ear with three lobe piercings, a tragus and an industrial one all done with similar studs and a bar.
- a bold ear with four lobe piercings, a daith piercing and an industrial one with shiny earrings and a bar.
Keeping this in view, can I put regular earrings in my industrial?
Common gauges, lengths, and jewelry: The most common gauge to get pierced with is a 14GA. … Straight barbells aren’t necessarily the only piece of jewelry that can be put in your Industrial piercing; you can even put a hoop in each piercing hole, or even two studs, as long as the barbell is the right gauge.
Keeping this in consideration, what do you wear for an industrial piercing?
Circular barbells, labret studs, and captive rings all work well in industrial piercing holes if you do not want to wear a standard barbell. There’s also a really neat piece of jewelry called a spiral that can be twisted in and out of both holes to wrap around the top of the ear.
Does Kylie Jenner have an industrial piercing?
Kylie Jenner got an industrial piercing on her right ear in April 2013. The metal barbell connects an existing piercing on the front of her ear to a new piercing on the back of her cartilage. She wore a captive bead ring in her second forward helix piercing and diamond studs in her lobes.
Is my ear big enough for an industrial piercing?
The look of an industrial piercing greatly depends on the anatomy of your ear. If you have a smaller ear, you might not be able to accommodate the industrial piercing. … Additionally, it might not make a great first piercing. Healing cartilage is more susceptible to issues like cartilage bumps or hypertrophic scarring.
What size do they pierce your industrial with?
Standard Piercing Sizes
| Piercing | Standard Gauge | Standard Length |
|---|---|---|
| Tongue Piercing | 14G | 5/8″ |
| Cartilage Piercing | 16G , 18G | 3/16″ , 1/4″ and 5/16″ |
| Eyebrow Piercing | 16G (14G is also commonly used) | 1/4″ , 5/16″ and 3/8″ |
| Industrial Barbell | 14G (16G is also commonly used) | 1 1/2″ (varies) |
Should I move my industrial piercing while cleaning it?
–Never spin the jewelry, move it back and forth, or move it while you’re cleaning it. The jewelry may feel tight or like it’s not moving around and that is OK. It will move around on it’s own. –In your shower, avoid any shampoo, conditioner or soap on the piercing.
Does Claire’s do industrial bar piercings?
This cool industrial bar for cartilage piercings will add a pretty touch to your cool cartilage piercings. It has a delicate key design embellished with pretty clear gems.
How much does an industrial piercing cost at Claire’s?
According to the official website ear piercings are free if you purchase a starter kit from the store which starts at about 19 and will increase from there greatly depending on what kind of earring kit you wish to purchase. Most of the time an industrial piercing can cost 45 to 85 for the piercing and a simple barbell.
How bad do industrial piercings hurt?
Industrial piercings are moderately painful. While they tend to hurt more than standard lobe piercings, they’re still much less painful than piercings on more sensitive areas. … The initial piercing pain is a sharp pain, like a hard pinch, and you may also experience some pain as the jewelry is pushed in place.
What to know before getting an industrial piercing?
Don’t worry we got you, here are 5 things you need to know before getting an industrial piercing.
- Anatomy. Before going in to get an industrial piercing you want to go to your local piercing studio and get your ear checked by a professional piercer. …
- If You’re Sick Don’t Get It. …
- Clean Your Ears. …
- Reputable Studio. …
- Be Prepared.
