Standard piercing sizes
| Piercing | Standard Gauge | Standard Length |
|---|---|---|
| Tongue Piercing | 14G | 5/8″ |
| Cartilage Piercing | 16G , 18G | 3/16″ , 1/4″ and 5/16″ |
| Eyebrow Piercing | 16G (14G is also commonly used) | 1/4″ , 5/16″ and 3/8″ |
| Industrial Barbell | 14G (16G is also commonly used) | 1 1/2″ (varies) |
Furthermore, can I put a 14G in a 16G piercing?
14g jewelry is larger than 16g jewelry, but you might be able to fit it. Yes, you can stretch you piercing to a 14g just make sure that the jewelry that you’re buying is suitable for a freshly stretching piercing. … It would just irritate the piercing even if it is fully healed.
Keeping this in consideration, what size is my Industrial bar?
The length of the barbell can range from 28-55mm in length depending on how far apart the piercing holes are located on your ear and of course by how large your ear is. The angle of the piercings and distance between the piercings will determine if a barbell industrial piercing is a good selection for you personally.
Do Industrial Bar holes close?
The industrial piercing goes through cartilage in your ear and depending on how long it has been pierced it will close eventually and faster than many other piercings because of the location.
Do industrial piercing get infected easily?
Industrial piercings are more prone to infection because there are 2 wounds, and the tension placed on the skin from the jewelry also increases inflammation and vulnerability to the skin. An infection occurs when harmful bacteria build up in one or both of the holes where your ear is pierced.
Can I put a 20G in a 16g piercing?
yes you can. When learning about piercings sizes you will know that the bigger the number the smaller the gauge of the piercing so yes you may use an 18g. the 18g is smaller than the 16g. Just be aware though that sometimes user smaller jewelry could cause your jewelry to get accustomed to that size.
Is 14g bigger than 16g?
14g is bigger. The lower the number, the bigger the needle or jewelry. … So buy 16g jewelry and a 14g needle, or 14g jewelry and a 12g needle. Body piercing doesn’t really use odd numbers, so the next size will always be the next even number.
How big is a 14 gauge piercing?
1.6 millimeters
What does an industrial piercing say about you?
Industrial Piercing
You tend to draw people in with your charming personality, but you only have a few very close friends. You‘re less likely to get hurt that way, because you may look all rough and tumble, but you‘re a big softy on the inside.
Can you put hoops in an industrial piercing?
An industrial piercing is any two pierced holes connected with a straight barbell. … Straight barbells aren’t necessarily the only piece of jewelry that can be put in your Industrial piercing; you can even put a hoop in each piercing hole, or even two studs, as long as the barbell is the right gauge.
What’s thicker 14g or 16g metal?
16ga steel is . 065” inches thick, that is about 1/16th of an inch thick. 14 gauge in comparison is . 083 inches thick which doesn’t sound like much except it is almost 30% thicker (27.6% to be exact).
Are all industrial bars the same size?
The barbell piercing worn in the ear cartilage goes by a few different names : The barbell is called an industrial barbell, construction bar, or industrial project bar. Sizing of these bars varies depending on the person, because everybody’s ears are a different size.
Can you sleep on an industrial piercing?
You want to avoid sleeping on an industrial piercing because it adds additional pressure on the jewelry. It will be more likely to have scarring if you sleep on it.
What is the smallest gauge for an industrial piercing?
Body Piercing Standard Gauges:
| Piercing | Standard Gauge |
|---|---|
| Tongue Piercing | 14G |
| Cartilage Piercing | 16G , 18G |
| Eyebrow Piercing | 16G (14G is also commonly used) |
| Industrial Barbell | 14G (16G is also commonly used) |
