Standard piercing sizes
Piercing | Standard Gauge | Standard Length |
---|---|---|
Tongue Piercing | 14G | 5/8″ |
Cartilage Piercing | 16G , 18G | 3/16″ , 1/4″ and 5/16″ |
Eyebrow Piercing | 16G (14G is also commonly used) | 1/4″ , 5/16″ and 3/8″ |
Industrial Barbell | 14G (16G is also commonly used) | 1 1/2″ (varies) |
Beside above, what size is my Industrial bar?
The length of the barbell can range from 28-55mm in length depending on how far apart the piercing holes are located on your ear and of course by how large your ear is. The angle of the piercings and distance between the piercings will determine if a barbell industrial piercing is a good selection for you personally.
Likewise, which is bigger 14G or 12G?
Please refer to the metric conversion chart below.
Gauge | Inches | Millimeters |
---|---|---|
14G | .064″ | 1.6mm |
12G | .082″ | 2.0mm |
10G | .102″ | 2.5mm |
8G | .125″ | 3.0mm |
Do Industrial Bar holes close?
The industrial piercing goes through cartilage in your ear and depending on how long it has been pierced it will close eventually and faster than many other piercings because of the location.
Can you sleep on an industrial piercing?
You want to avoid sleeping on an industrial piercing because it adds additional pressure on the jewelry. It will be more likely to have scarring if you sleep on it.
Do industrial piercing get infected easily?
Industrial piercings are more prone to infection because there are 2 wounds, and the tension placed on the skin from the jewelry also increases inflammation and vulnerability to the skin. An infection occurs when harmful bacteria build up in one or both of the holes where your ear is pierced.
What does an industrial piercing say about you?
Industrial Piercing
You tend to draw people in with your charming personality, but you only have a few very close friends. You‘re less likely to get hurt that way, because you may look all rough and tumble, but you‘re a big softy on the inside.
Are there different size industrial bars?
Because every ear is different, the room between the two piercing holes differs from person to person. … For small ears, there are also many industrial barbells available with a length of 35 to 32 mm. Those lengths are also often used for vertical industrial barbells. The standard thickness is just 1.6 mm.
Is industrial piercing worth it?
I am able to sleep on my side that has the industrial now that it is fully healed. … Yeah the year of healing was a pain, but like everyone else here has stated, totally worth it. I’ve had mine for going on two years and it’s my favorite piercing of the three (four tomorrow) I have.
How long will my industrial piercing hurt?
A. It’s normal for an industrial piercing to hurt for quite a while after getting pierced. Some ear cartilage piercings stay sore for 6 to 8 months or more. How long you experience soreness/tenderness around your industrial piercing is related to where you are in the healing process.
Should I move my industrial piercing while cleaning it?
–Never spin the jewelry, move it back and forth, or move it while you’re cleaning it. The jewelry may feel tight or like it’s not moving around and that is OK. It will move around on it’s own. –In your shower, avoid any shampoo, conditioner or soap on the piercing.
Can you put a 14g in a 16g?
14g jewelry is larger than 16g jewelry, but you might be able to fit it. … The size difference between the two is small, but if you go back and forth it would obviously be a stretch every time you wanted to wear the 14’s, since your ear would shrink back to a 16g while you had that jewelry in.
What size is 6g in MM?
4.0mm
Gauge | Millimeters | Inches |
---|---|---|
10g | 2.5mm | 0.098″ |
8g | 3.0mm | 0.118″ |
6g | 4.0mm | 0.157″ |
4g | 5.0mm | 0.196″ |
How big is a 14 gauge piercing?
1.6 millimeters