What size earring do you get pierced with?

Standard ear piercings are a 20g or 18g if they were pierced by a gun. If they were pierced by a professional, the lobe piercing will typically be a 16g or 14g.

>> Click to read more <<

Similarly, how do you know what size piercing to get?

To measure your nose, cartilage, or septum piercing you will need a caliper or you will need a ruler and a piece of paper. You are going to be measuring the distance from the piercing hole to the edge of your nose or ear. The measurement that you get will be the smallest inner diameter that you can wear.

Thereof, what earrings are best for newly pierced ears? Surgical stainless steel earrings are typically your best bet for new piercings, as this metal is the least likely to cause an allergic reaction. Nickel and cobalt allergies are very common, so avoid these metals when you first get your ears pierced.

Besides, what is the standard size of an earring post?

COMMON SIZE

COMMON LENGTH/DIAMETER
* indicates the most common size – updated 2020
Regular Earring Post 1/4″(6mm)
Lip and Labret 5/16″(8mm)*, 3/8″(10mm), 1/2″(12mm)
Monroe/Madonna 1/4″(6mm), 5/16″(8mm)*, 3/8″(10mm)

Can I put a 16g in a 14g piercing?

Yes all day you can. However, the 16g post is thinner than the 14g. Downsizing is not an issue unless you’ve got a large collection of 14g jewelry that you wish to wear again. Downsizing to 16g is safe as long as it is healed.

How big is a 14 gauge piercing?

gauge inches decimal millimeters
16g 0.051″ 1.291 mm
0.062″ 1.587 mm
14g 0.064″ 1.628 mm
12g 0.081″ 2.053 mm

Can I put a 20G in a 16G piercing?

If you pierce yourself with a 16G and put in a 20G earring, the earring will fit in easily and the hole will eventually shrink to the right size.

What is bigger 12 or 14 gauge piercing?

When discussing gauges, references to a “larger gauge” means bigger around, not a bigger number. That is to say that if you’re told that you need a larger gauge than 14, you need to look at 12 or 10 which are wider, not at 16.

Which is bigger 16 or 18 gauge piercing?

In the U.S. an 18 gauge earring measures approximately 5/128-inch while a 16 gauge earring measures 3/64-inch, for a difference of 1/128-inch or approximately 0.0078 inches.

Why are butterfly back earrings bad?

Friction Backs – Also known as push backs or butterfly backs, these are the most common type. Friction backs use tension to grip the earring post. … You slide the earring back onto the earring post until it comfortably touches your earlobe. Cons: As with any spring, they eventually lose their tension and can fall off.

How can I make my ear piercing heal faster?

Follow these steps to take care of a minor piercing infection:

  1. Wash your hands before touching or cleaning your piercing.
  2. Clean around the piercing with a saltwater rinse three times a day. …
  3. Don’t use alcohol, hydrogen peroxide, or antibiotic ointments. …
  4. Don’t remove the piercing.

What age is best for ear piercing?

“Any time you puncture the skin, you open up the opportunity for infection, and because infants still have developing immune systems, I encourage parents to wait until their child is at least 6 months old to get her ears pierced,” says Wendy Sue Swanson, M.D., a Parents advisor and a pediatrician at Seattle Children’s …

How many mm is a standard earring?

A

Gauge Millimeter Inch
16g 1.2mm 3/64″
14g 1.6mm 1/16″
12g 2mm 5/64″
10g 2.4mm 3/32″

Do earring backs come in different sizes?

They come in a variety of sizes, with the smaller ones being the most affordable type earring back. The drawback of friction backs is that they tend to lose their grip on the post through repeated use. The tension can sometimes be readjusted, but eventually friction backs may need to be replaced.

Are all earring posts the same size?

What You Need to Know About Earring Posts. … Standard earrings are typically 16-20 gauge, or 1.2 mm to . 8 mm. Thicker gauges require a larger piercing hole, so if you bought a 14 or 12 gauge post earring it may hurt your ears if your piercing is not wide enough to accommodate for the thickness of the post.

Leave a Reply