Similarly, how big is a 6 gauge piercing?
| gauge | inches decimal | millimeters |
|---|---|---|
| 6g | 0.162″ | 4.115 mm |
| 0.188″ | 4.762 mm | |
| 4g | 0.204″ | 5.189 mm |
| 0.250″ | 6.350 mm |
| GAUGE | COMMON PIERCINGS |
|---|---|
| 20G (0.81mm) | Most earlobe piercings are made with a 20G needle, as are some nose piercings. |
| 18G (1.0mm) | An 18G needle can be used for earlobe piercings, nose piercings, as well as some cartilage piercings (e.g. forward helix). 18G earrings are great for many healed cartilage piercings. |
Hereof, why is the jump from 8g to 6g so big?
It’s probably for 2 reasons. First off, there’s a larger size jump between 8g and 6g. Up until 8g, there is only a difference of 0.6mm or less in between each size. After 8g, the differences get larger, and there is a 1 mm size difference between 8g and 6g.
What is the smallest earring size?
These 1mm (1/32 inch in Diameter) Nose Studs / Ball Stud Earrings are smallest possible size and are barely larger than the ear posts themselves.
Can I put a 14g in a 16g piercing?
14g jewelry is larger than 16g jewelry, but you might be able to fit it. Yes, you can stretch you piercing to a 14g just make sure that the jewelry that you’re buying is suitable for a freshly stretching piercing.
Can you put a 16g earring in an 18g hole?
If I pierce with a 16g needle, can I use 18g jewelry? Yes you can, in fact that’s typically what a piercer will do, especially with cartilage piercings. They pierce with a gauge size bigger than the actual jewelry. It allows room for swelling and placing the jewelry.
What gauge is 3/16 of an inch?
15 U.S. Code § 206. Standard gauge for sheet and plate iron and steel
| Number of gauge | Approximate thickness in fractions of an inch | Approximate thickness in decimal parts of an inch |
|---|---|---|
| 6 | 13/64 | .203125 |
| 7 | 3/16 | .1875 |
| 8 | 11/64 | .171875 |
| 9 | 5/32 | .15625 |
What size needle is used for cartilage piercing?
For tragus, anti-tragus, helix, rook, conch and most cartilage piercings (any part of the ear other than your lobe) a piercer will use an 18 gauge (as seen above) or 16 gauge needle. Depending on the anatomy of your ear, the piercer may use a 14 gauge needle as well.
How do you stretch your helix piercing?
First, take a hot shower, and massage the area. This will help the cartilage stretch easier by pulling more blood into the area! Next, once you’re out of the shower of course, take the taper and try to insert it. If it doesn’t easily go in, remove it and put the lube on the taper and on your ear!
What is the smallest gauge for cartilage earrings?
Standard Piercing Sizes
| Piercing | Standard Gauge | Standard Length |
|---|---|---|
| Cartilage Piercing | 16G , 18G | 3/16″ , 1/4″ and 5/16″ |
| Eyebrow Piercing | 16G (14G is also commonly used) | 1/4″ , 5/16″ and 3/8″ |
| Industrial Barbell | 14G (16G is also commonly used) | 1 1/2″ (varies) |
| Labret Lip Rings | 14G or 16G | 1/4″ , 5/16″, and 3/8″ |
How long does it take to stretch ears to 00?
roughly two years
How long does it take to go from 8g to 6g?
3-4 months is a good amount of time to wait for any stretch.
Does stretching from 8g to 6g hurt?
You’re right in that a stretch shouldn’t hurt at all. It’s also great to hear that you listened to your body and didn’t force the stretch. Sad part is that you’re going to have to treat your ears likes they’re freshly stretched to a new size and give them a break to heal. The longer the break the better.
