16 gauge
Herein, what size MM is a forward helix?
A 5.5mm back post will fit a healed thin helix, a forward helix, a thin tragus, anti–tragus, or an earlobe of average thickness. A 6.5mm back post will safely fit a helix of average thickness, the tragus, the rook, conch or thicker earlobes and the nose.
Beside above, which is thicker 16 gauge or 18 gauge piercing?
Metric Gauge Conversion
An 18 gauge earring measures approximately 1.0 mm and a 16 gauge earring measures approximately 1.2 mm, for a difference of 0.2 mm.
Can I put a 16G in a 14g piercing?
Yes all day you can. However, the 16g post is thinner than the 14g. Downsizing is not an issue unless you’ve got a large collection of 14g jewelry that you wish to wear again. Downsizing to 16g is safe as long as it is healed.
When can I put a hoop in my Helix?
Most piercing points suggest 4 to 6 weeks for changing cartilage but it’s better to wait at least 8 to 10 weeks.
Can I put a 20G in a 16g piercing?
yes you can. When learning about piercings sizes you will know that the bigger the number the smaller the gauge of the piercing so yes you may use an 18g. the 18g is smaller than the 16g. Just be aware though that sometimes user smaller jewelry could cause your jewelry to get accustomed to that size.
Is 14g bigger than 16g?
Jewelry is measured through a gauge system (see chart below). The higher the gauge number the smaller the wire is. A standard “earring” is usually 20 gauge. Jewelry gauges/sizes can vary between manufacturers.
| Gauge | Millimeter | Inch |
|---|---|---|
| 16g | 1.2mm | 3/64″ |
| 14g | 1.6mm | 1/16″ |
| 12g | 2mm | 5/64″ |
| 10g | 2.4mm | 3/32″ |
Can you put a regular earring in a helix piercing?
In some cases, you can use any type of earring for the cartilage piercing, such as hoops and posts. Yet, earrings made for cartilage are generally more comfortable. Cartilage earring types include: … Posts or studs: Posts or studs in all metal or metal with gem stones are suitable for cartilage piercings.
Will an 18 gauge fit normal piercing?
An 18G needle can be used for earlobe piercings, nose piercings, as well as some cartilage piercings (e.g. forward helix). 18G earrings are great for many healed cartilage piercings. A 16G needle is used for most cartilage piercings, including the tragus, helix, rook, conch and daith.
How can I widen my helix piercing?
First, take a hot shower, and massage the area. This will help the cartilage stretch easier by pulling more blood into the area! Next, once you’re out of the shower of course, take the taper and try to insert it. If it doesn’t easily go in, remove it and put the lube on the taper and on your ear!
What gauge does Claire’s use for cartilage?
Well, I just found out that Claire’s pierces with a 20 gauge and apparently the more common gauge for cartilage is 16.
Is 20G bigger than 16g?
Please refer to the metric conversion chart below.
| Gauge | Inches | Millimeters |
|---|---|---|
| 20G | .032″ | 0.81mm |
| 18G | .040″ | 1.0mm |
| 16G | .050″ | 1.2mm |
| 14G | .064″ | 1.6mm |
What is the smallest gauge size?
The sizes range from millimeter measurements to inch measurements. The smallest gauge, 20, measures 0.88 millimeters or 1/32 inch. The bigger the gauge, the smaller the numbers get.
What is the smallest gauge for septum ring?
The smallest gauge you should use is 18 or 20, but watch for pain, irritation, or beginning stages of the “cheese cutter effect” where the jewelry starts to migrate out through the skin. The smallest diameter ring I’ve been physically able to put in myself is 5/16ths inch.
