JEWELRY TYPE
Standard Hoop Inner Diameter | |
---|---|
Ear Cartilage (Helix, Tragus, Lobe, etc.) | 5/16″ (8mm) |
Earhead, Thin Helix (Hole near the edge) | 1/4″ (6-6.5mm) |
Conch | 3/8″-1/2″ (10mm–12mm) |
Nose | 5/16″ (8mm) |
Furthermore, can I put a 16 gauge in a 18 gauge hole cartilage?
Yes you can, in fact that’s typically what a piercer will do, especially with cartilage piercings. They pierce with a gauge size bigger than the actual jewelry. It allows room for swelling and placing the jewelry.
Thereof, how do I know what size my piercing is?
The measurement that you need is the distance from the piercing hole to the edge of your ear. Take this measurement in a straight line, because if you measure at a diagonal angle you will end up with a hoop that fits larger than you anticipated.
Can I put a 14g in a 16g piercing?
14g jewelry is larger than 16g jewelry, but you might be able to fit it. … The size difference between the two is small, but if you go back and forth it would obviously be a stretch every time you wanted to wear the 14’s, since your ear would shrink back to a 16g while you had that jewelry in.
What is smaller than a 16 gauge?
An 18 gauge, one of the smallest gauges, is actually smaller than a 16 gauge earring, with the largest gauges being 0, 00, and 000 gauge jewelry.
Can I put a 20G in a 16G piercing?
yes you can. When learning about piercings sizes you will know that the bigger the number the smaller the gauge of the piercing so yes you may use an 18g. the 18g is smaller than the 16g. Just be aware though that sometimes user smaller jewelry could cause your jewelry to get accustomed to that size.
What gauge does Claire’s use for cartilage?
Well, I just found out that Claire’s pierces with a 20 gauge and apparently the more common gauge for cartilage is 16.
What size gauge will shrink back?
Most professionals in the piercing world suggest going no larger than a 0 gauge, preferably a 2 gauge, if you want your ears to shrink back to standard size. If you stop at this point, you should have no problem with your ears shrinking back.
Is 20G bigger than 16G?
Please refer to the metric conversion chart below.
Gauge | Inches | Millimeters |
---|---|---|
20G | .032″ | 0.81mm |
18G | .040″ | 1.0mm |
16G | .050″ | 1.2mm |
14G | .064″ | 1.6mm |
How do gauge sizes work?
Gauge is abbreviated “g.” Gauge sizes are usually a number followed by “g” or the word “gauge.” … “Here [in the U.S.] it’s measured by gauge.” Gauge sizes work in reverse, meaning that the higher the number, the thinner the width. So higher numbers (like 16 gauge) are thinner than smaller numbers (like a 6 gauge).
What size gauge is a piercing gun?
22 gauge
Can you put a smaller gauge in a piercing?
Yes you can. The jewellery won’t be very snug, though, and might move around a lot. Having said that, the whole will probably close up a bit around the smaller gauge jewellery so you might not be able to wear 14g there any more. … So I used this 2mm diameter needle for a piercing with a 16g jewellery.
What is smaller 20 gauge or 18 gauge?
Gauges get larger with decreasing number (i.e. a size 00G is massive compared to a 20 gauge). with an 18 gauge. If you want it smaller, ask for a 20 or even 22 gauge when getting pierced.
What size gauge is a normal earring?
20G