Please refer to the metric conversion chart below.
Gauge | Inches | Millimeters |
---|---|---|
18G | .040″ | 1.0mm |
16G | .050″ | 1.2mm |
14G | .064″ | 1.6mm |
12G | .082″ | 2.0mm |
In respect to this, what size needle is used for piercings?
Gauge Size
GAUGE | COMMON PIERCINGS |
---|---|
20G (0.81mm) | Most earlobe piercings are made with a 20G needle, as are some nose piercings. |
18G (1.0mm) | An 18G needle can be used for earlobe piercings, nose piercings, as well as some cartilage piercings (e.g. forward helix). 18G earrings are great for many healed cartilage piercings. |
Also to know is, what size taper should I start with?
Getting Started
The starting point for most people is 14g, which is just slightly larger than a regular earring. If you’ve only recently healed from a regular ear piercing, you may want to start out with 16g tapers, just to be on the safe side.
Can you put a 14g in a 16g?
14g jewelry is larger than 16g jewelry, but you might be able to fit it. Yes, you can stretch you piercing to a 14g just make sure that the jewelry that you‘re buying is suitable for a freshly stretching piercing.
Can I put a 14g in a 16g piercing septum?
Most septums are pierced at a 14g or a 16g more commonly. Say you got pierced at a 16g, once it’s healed. Putting a 14g ring in wouldn’t be hard at all, same as putting a 12g ring in. Once it gets to around there it’s better to start using tapered jewelry.
Can you put a 18g earring in an 16g hole?
yes you can. When learning about piercings sizes you will know that the bigger the number the smaller the gauge of the piercing so yes you may use an 18g. the 18g is smaller than the 16g. Just be aware though that sometimes user smaller jewelry could cause your jewelry to get accustomed to that size.
What size gauge is a normal earring?
Gauge Range for Body Jewelry
“Gauge [size] will vary pretty widely based on the client’s anatomy, preferences, and piercing location,” Faris explains. “Standard size is 18 g, which is what I mostly use for all my ear piercings,” Thompson reveals. “For piercings in general, 18 g through 16 g is the most common.
What size is after 1/2 inch gauges?
Convert Ear Gauge to mm and Inch
Millimeters (mm) | Inches (“) |
---|---|
10mm | 3/8″ |
11mm | 7/16″ |
12mm | 1/2“ |
13mm | 17/32″ |
Can I put a 14g in a 12g piercing?
As for going from 12g to 14g for nipples, it’s fine. 14g is stable as well, but your piercing fistulas will shrink around the jewelry so you’ll have to stretch if you ever plan on going back up to 12g.
Is 18g thicker than 16g?
Though it seemingly goes against logic, earrings and other jewelry gauge sizes actually get bigger the lower the number of the gauge. An 18 gauge, one of the smallest gauges, is actually smaller than a 16 gauge earring, with the largest gauges being 0, 00, and 000 gauge jewelry.
How can I size up without tapers?
How to Stretch Ears Without Tapers
- 1 Wearing Heavier Plugs to Make Ears Bigger.
- 2 Adding Larger Jewelry to Stretch Your Gauge.
- 3 Adding PTFE Tape to Your Current Plugs.
How long should you leave tapers in before going up a size?
Because of the fact that everyone’s body reacts differently, this answer varies. It is recommended that you wait at least 6 weeks in between stretches. This will give your earlobes time to heal up and become a little loose. However, we recommend that you wait 2-6 months between each stretch.
Can I leave tapers in overnight?
If it’s too tight, what you’ll do is tear the skin off the inside of your hole. This is painful and incredibly unpleasant and bloody. Repeat until you get the taper all the way in. Leave it for at least a couple of hours, ideally overnight.