An 18G needle can be used for earlobe piercings, nose piercings, as well as some cartilage piercings (e.g. forward helix). 18G earrings are great for many healed cartilage piercings. A 16G needle is used for most cartilage piercings, including the tragus, helix, rook, conch and daith.
Accordingly, is 16 or 18G bigger?
Gauge Sizing
Though it seemingly goes against logic, earrings and other jewelry gauge sizes actually get bigger the lower the number of the gauge. An 18 gauge, one of the smallest gauges, is actually smaller than a 16 gauge earring, with the largest gauges being 0, 00, and 000 gauge jewelry.
People also ask, how do I know what gauge my body jewelry is?
If you don’t know which gauge you wear you may be able to measure it at home! As long as you are wearing the correct gauge of jewelry in your piercing, just use a caliper to measure how thick (big around) your jewelry is. You cannot measure gauge accurately with a ruler.
Can I put a 14g in a 16g piercing?
14g jewelry is larger than 16g jewelry, but you might be able to fit it. Yes, you can stretch you piercing to a 14g just make sure that the jewelry that you’re buying is suitable for a freshly stretching piercing. … It would just irritate the piercing even if it is fully healed.
What is bigger a 20 or 18 gauge?
Gauges get larger with decreasing number (i.e. a size 00G is massive compared to a 20 gauge). with an 18 gauge. If you want it smaller, ask for a 20 or even 22 gauge when getting pierced.
Can I put a 20G in a 16g piercing?
yes you can. When learning about piercings sizes you will know that the bigger the number the smaller the gauge of the piercing so yes you may use an 18g. the 18g is smaller than the 16g. Just be aware though that sometimes user smaller jewelry could cause your jewelry to get accustomed to that size.
What is the smallest gauge?
20
How long do you keep tapers in before putting in plugs?
Generally, you need to wait at least 3-4 months before gauging the fresh plug piercing, after it’s initially done. Then, you‘ll have to take breaks of at least 1 month between other 1-sized stretches.
Can I put a 16g in an 18g piercing?
If I pierce with a 16g needle, can I use 18g jewelry? Yes you can, in fact that’s typically what a piercer will do, especially with cartilage piercings. They pierce with a gauge size bigger than the actual jewelry. It allows room for swelling and placing the jewelry.
How do I know my gauge size?
Is 14G bigger than 16G?
Jewelry is measured through a gauge system (see chart below). The higher the gauge number the smaller the wire is. A standard “earring” is usually 20 gauge. Jewelry gauges/sizes can vary between manufacturers.
| Gauge | Millimeter | Inch |
|---|---|---|
| 16g | 1.2mm | 3/64″ |
| 14g | 1.6mm | 1/16″ |
| 12g | 2mm | 5/64″ |
| 10g | 2.4mm | 3/32″ |
How big is a 14 gauge?
1.6 millimeters
What is smaller 16 gauge or 18 gauge?
Gauge is the standard unit of measure for sheet steel and wire products. The lower the number, the thicker the steel. Therefore, 16 gauge is thicker than 18 gauge steel. … The thinner steel will be louder and higher pitched, whereas the 16 gauge will be a lower pitch and substantially quieter when struck.
